5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

HOW TO: Add Digital Rearview Mirror

vincentw56

Spends too much time on here
Joined
Aug 5, 2020
Messages
3,986
Reaction score
2,648
Points
113
Age
53
Here are the instructions for installing the digital rearview mirror in the RAM.

Part List:
Mirror with 1 Video Input Channel, no FCW or ACC - 68448639AB

Mirror with 1 Video Input Channel, with FCW or ACC - 68448641AB

Mirror with 2 Video Input Channel, no FCW or ACC - 68519111AA

Mirror with 2 Video Input Channel, with FCW or ACC - 68519222AA

Center high mounted stop lamp with camera - 68551077AB

10' Fakra Z - Female to Female
Amazon.com[/TD]


Parts if you have a 2019/2020:
2021+ BCM - 68496414AD
Wiring Harness from Jimmy07

You only need one of the mirrors. Just choose the one that fits your vehicle and if you want to have 2 inputs or not. You only need the 2 inputs if you plan on adding another camera like cargo, trailer, etc. For the 2019/2020 you will need a 2021+ BCM and the wiring harness from Jimmy07. You can get a used one from a junkyard. You can then stash this under the driver's side dash or the front seats.

Installation is fairly simple. Replace the CHMSL with the new one. Run the cable in the headliner from it to the mirror. Replace the mirror with the new one. Connect the mirror, truck and BCM using the wiring harness. Start the truck and enjoy your new mirror.

2019/2020s will lose auto dimming side mirrors. You can swap your BCM for a later new one (not used), but you would need the dealer to restore your configuration. If you swap it yourself, you'd need to do it at the dealer because it won't work right until the restore is done.

For 2021+, use AlfaOBD to set the following settings for auto dim mirrors to work.

LIN & Misc: CRVMM Present to NO

CBC Config I/O Usage: RVDM Present to YES
 
Last edited:
Reserved for future.
 
So not replacing the current bcm (for a 2019)? adding a 2nd bcm under the seat?
 
So not replacing the current bcm (for a 2019)? adding a 2nd bcm under the seat?
You can try replacing it, but you have to have the dealer do it because they have to do a procedure that assisns your VIN to it. I had no luck with that working so I cannot verify it would work. That's why it isn't part of the guide. If someone does it and it works, I'll add that as an option. But it needs to be verified working.
 
so you have a 2nd bcm stashed with a harness from Jimmy07? did you have to do special configuring on the 2021 bcm?
 
so you have a 2nd bcm stashed with a harness from Jimmy07? did you have to do special configuring on the 2021 bcm?
No, that's why there is nothing in the how to about programming with AlfaODB.
 
Just to make sure. If my truck has FCW then I should get mirror with that feature, right?
and is it 10' enough length of fakra cable if I have sunroof?
 
Just to make sure. If my truck has FCW then I should get mirror with that feature, right?
and is it 10' enough length of fakra cable if I have sunroof?
Yes on both. I have the sunroof. Even without it, 6 foot is just a little too small. 8 foot would be perfect.
 
Yes on both. I have the sunroof. Even without it, 6 foot is just a little too small. 8 foot would be perfect.
anything needs to be changed in alfa? I'm seeing options :
 

Attachments

  • Untitled.jpg
    Untitled.jpg
    59.2 KB · Views: 355
Last edited:
68448641AB, 68444540AB + 10ft wire is all I need if I have the 2021 model with forward collision warning correct? I also read that you loses the dimming option of the passenger side mirror is that true ?
 
68448641AB, 68444540AB + 10ft wire is all I need if I have the 2021 model with forward collision warning correct? I also read that you loses the dimming option of the passenger side mirror is that true ?
Yes, that's all you need. I don't know about auto-dimming on 2021+. I do know you lose it on 2019/2020.
 
Is there any issue with the LED brake light replacing the incandescent light? Like hyperflash? Are transistors going to be needed or service lights coming on?
 
Is there any issue with the LED brake light replacing the incandescent light? Like hyperflash? Are transistors going to be needed or service lights coming on?
No issues. I had the normal incandescent lights.
 
Was wondering if the rearview mirror from a 3500 fits the 1500? I believe if I'm not mistaken it has the same part #. Dumb question I know. I just need confirmation before I splash $600 on a rearview mirror 🤣
 
Was wondering if the rearview mirror from a 3500 fits the 1500? I believe if I'm not mistaken it has the same part #. Dumb question I know. I just need confirmation before I splash $600 on a rearview mirror
If it's the same as any numbers listed earlier in this thread, it'll fit.
 

Users who are viewing this thread

Back
Top