Recent content by PROJO

It sounds like something that also, touches the brake pads - as it squeaks too, when I apply the brakes.

So, the front bilsteins - were the issue? I'm purhcasing some bilstein 5100s for the front, I'm wondering if that'll fix the issue

Let us know, how it goes - interested to see what the issue is, and if the warranty will cover it.

Hi, I have a 2020 Ram Rebel (5.7 litre) I've noticed a squeaking noise coming from the front driver wheel side - whenever, I would brake or going over bumps. Would anyone know what the cause of this is, and is it a common issue? Also, would the warranty fix this issue? Thank you, in advance

How much lift did setting #5 get you up front (in inches)?

Could you add a top 1.5" spacer to these coil overs?

Yeah, there won't be any trimming, as I had the 2" preloaded spacer in - and with those extra 2" there were no trimming with 35s. there's a local shop where I am, that had contacted their supplier - and I'll be getting one in by November 10th - few weeks, but not too long.

Awesome!! Thank you, for the advice. I ordered a pair of 5100s - coming in next weekend. My setup is going to be as follows: 1) ReadyLift 3.5" (took out the preloaded spacer) - 2" rear spacer and 1.5" Tophat spacer still on, with upper control arms. 2) 35" BFG KO2s - with 20x10 -18 offset...

Awesome!! Looks good! Thank you, for the photo - I'm going to be installing the Bilstein 5100s next week. How do you like the ride from them, and do they feel better than the stock suspension?

What setting did you put your bilsteins at #4 or #5 to achieve 1.5" of front lift?

Awesome looking truck! How do you like the Bilstein 5100s on the rebel? Do they ride better than the stock front shocks? - also, how much lift does setting #5 get you up front?

2020 Ram Rebel (Crew Cab) - 4" BDS with Rear Fox Shocks - BFG KO2s (35") - 20x10 -18 offset FUEL MAVERICK Wheels - NFAB Podium Step bar - BILSTEIN 5100s (Adjustable Front Suspension)/Aftermarket Fox rear shocks

I currently have the 1.5" top hat spacer from the 3.5" readylift - took out my 2" preloaded spacer, as it wasn't recommended to put on the Rebels...What would you suggest I do to gain those 2" back (since the falcons don't really achieve the full 2")

Would you consider purchasing the Bilstein 5100s for the Rebel, to gain the 2" of lift?

Thank you, for the advice. I was actually thinking of installing either the Bilstein 5100s to get 1" or 2 - other option is to purchase a higher end suspension kit (Falcon Shocks all around, which would give me a front lift, too.