Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Sounds great hopefully the rear axle doesnt shift too much to one side if not you’d need a track bar bracket which is the same pinch I’m in since nobody makes on currently to correct the rear geometry to close to factory
Makes me really wonder how similar the Jeep JT Galdiator is similar in...
Really that’s interesting mind taking pics of what it measures front and rear
what most likely happened is either a set of regular ORP strut spring perch retaining clips were used to have the Mopar lift work with the Fox front Struts supplied in the kit but cannot find those clips anywhere not...
As far as to those who don’t have a Rebel and want Front Coilovers that would be a viable option as the Mopar kit already includes Fox 2.0 rear shocks
what are you planning on the rear so it’s not squatting unless you’re cool with it and going for that Cali lean look lol
Not sure if you’re aware but the Mopar lift does not fit the Ram Rebel models as those come with Bilsteins on them and you reuse the ring from factory front struts on to the new Fox Struts
Even when doing front Fox Coilovers now you’re talking about a $1300 Mopar lift kit
Plus $900 or so for...
Same thing I’m currently doing now I have a Readylift 3.5SST kit but not gonna use the preload and set coilovers at a 1-1.5” lift with the tophat 2” spacer that comes in the SST only issue I see is the rear Track Bar as the Readylift SST kit does not have a drop bracket for it and do not know of...
Part number 985-24-231: 19-ON Ram 1500, Rear, PS, 2.0, IFP, 0-2” Lift
part number 985-02-136: 19-ON Ram 1500, Front Coil-Over, PS, 2.0, IFP, 0-2” Lift
The front is a coil over which looks like it’d be a good install for most if not all trim levels except the air suspension models as the Rebels...
Was on Fox Suspension website the other day noticed some part numbers on there that “fit” the current Ram 1500 DT but cannot find anyone info of anyone that has installed or where to buy from
I would look into a Powerwagon at a dealer with them and see about getting a replacement switch using the vin off that those don’t have exhaust brakes and also utilize parksense (F/R), tow/haul, and traction control off buttons
i too would like to do this on my Rebel but need to get some time...
I’m close to pulling the trigger on these at my dealer and have a tech buddy that works there who’s gonna install and flash for me
Stuck between these and just getting Amp Research Xtreme with dual motors on em would hate to be out of warranty and have a motor go bad and for $300 extra in cost...
Does anyone know if factory steps will work on Level 2 Ram Rebel with 8.4 Uconnect Nav screen and if the functions to deploy from the screen will be available with a flash similar to the Lkmited models
What would be cool is getting those switches to have the same icons but from the 2500 HD with 6AUX upfitters my Rebel has Parking sensors, Traction control, and tow/haul no air suspension want to get Aux switches since like you said they’re screwed in
I think they look great personally I’d love the smooth look of them maybe even combined with Fiberwerx Wide Front Fenders that way I don’t have to cut or mess with the bed
My rebel is not on air but can get a pretty close height setup as she sits currently it is 38” in front, 40” in rear
I’m thinking of doing 1.5 spacer in back and do either 2.5” or 3” strut spacer along with Ready Lift UCAs rated up to 6” of lift which would put it at either 40.5” or 41” up...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.