Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
I have 18x9 -12 method NVs with 285 75 ridge grapplers (about 35x11.5). Also have the Mopar lift with ORG front springs. I had to do minor clearancing to get them to fit without rubbing. I ordered 1.75 spacers and they don't work. Rubs like crazy and I haven't had time to see if there's...
Are your headlights on? The headlights have to be on (not just the dial turned to auto) for the foglights to turn on. If your headlights are on and the fogs are not then yes, you may have to plug in that provided harness the other way. I installed this kit on my LED truck a couple weeks ago.
Install took probably 3 hrs give or take, but I work slow! I took the wheel off and removed the bottom wheel liner. The main wheel well liner I removed the front half of the screws and folded it back. You dont need to switch any wires. The adapter in the kit is reversible.
OK, So I installed the diode dynamics kit on my truck today. These are the part numbers you will need to fit it on an led equipped truck with parking sensors.
Ram part # 68403915AA Halogen fog light brackets
Ram part #68318117AB Fog light bezel kit with parking sensors
This is my thread about...
So I bought the Diode Dynamic SS3 Pro fog light kit for my truck with the LED lighting. The kit says it's only for trucks with non LED lights, but I figured I could make it work. For LED equipped trucks you will also need the brackets and bezels from a non led truck. I needed the bezels with...
The parts I received from DD are correct and for a non led truck. I have an led equipped truck and ordered those 2 ram part numbers to be able to install them on my truck. I believe the part number for the Ram non led fog light brackets may be incorrect. I don't see how the DD bracket could...
I just received both of those part numbers and I also think the bracket is incorrect. Does anyone know the correct part number? I have my DD SS3s and want to install them!
I do think the Vleds are good enough for a reverse light. I got these lights for a dif purpose, although they would be helpful if you were backing up somewhere very dark.
This is the switch box and connectors I used. I mounted it in my center console. Had to unbolt the console to drill a small hole in it and run the wire from under hood. Was pretty easy and quick. will get a pic of it in the truck later.
Only problem with the switch panel is the leads...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.