Any Rebels out there with the dealer installed 1"Mopar lift?

[Rebel Randy]

Need to see some pics. Maybe w/ 35's ?

 

[Manapua]

35's on 20's
View attachment 12898

I must be mistaken, but I thought the 2” Mopar lift couldn’t be used with previous gen Rebel because of the air suspension.

After seeing the Rebel Smoke concept with the 2” Mopar lift (and 35’s), I thought perhaps it can used on the Rebel with standard suspension.

EDIT: After doing some more research it appears that the Mopar kit is still not compatible with the new rebels.

 

[Manapua]

Agreed, my conclusion as well.

 

[Gkmathiesen]

35's on 20's
View attachment 12898

Jake, is this just a standard 2" lift? So putting 35x12.5/20 is there rubbing?

 

[VaderRebel]

You only need to level a coil suspension Rebel to fit 35's. To properly level a Rebel with less than 1/4" rake, 2.5" top of strut spacer will do the job, in my experience. But because the Rebel already has longer struts you need UCA's to handle the new balljoint angles.

 

[ortvk]

Ok so my question....how do you know if your Rebel has the 1" lift or not? Looking at my window sticker and see nothing but the level 2 equipment group.

 

[kjn86]

Ok so my question....how do you know if your Rebel has the 1" lift or not? Looking at my window sticker and see nothing but the level 2 equipment group.

All have the 1" standard with the Rebel trim.

 

[ortvk]

All have the 1" standard with the Rebel trim.

ok thats what I was thinking. seems like only the ones with the air do not have it then?

 

[kjn86]

ok thats what I was thinking. seems like only the ones with the air do not have it then?

I think the air does have it. It just adds even more lift with the suspension fully raised than the coil springs.