5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Is it normal for new tires to look like this?

Scram1500

Spends too much time on here
Joined
Jan 15, 2020
Messages
3,090
Reaction score
6,252
Measure the tread depth they should be 11/32. That schmutz on the tire is mold release agent
 

HSKR R/T

locally hated
Site Supporter
Joined
Jul 25, 2020
Messages
10,222
Reaction score
10,126
There have been stories of TRUCKS sold as “new”, and later found out they were wrecked / damaged trucks and repaired.
Lots of vehicles that are damaged in shipping and repaired are sold as new. And the dealership does not have to report the damage to Carfax or any other reporting agency. And until vehicle is titled, it is still a "new" car

As long as the vehicle makes it off the car carrier onto dealership lot, it is then the responsibility of the dealer to handle any damages.
 

CogitoErgoLevo

Active Member
Joined
Feb 24, 2021
Messages
183
Reaction score
254
Location
Los Angeles
Looks like the tech used a ton of whatever grease they use to mount the tires and did not clean them after.
My tires looked pretty much like that yesterday after installation and right before the tech cleaned them.
I don't have nubs in my new tires either btw, and I am sure that mine are new.
 

Darksteel165

Legendary member
Joined
Dec 16, 2021
Messages
6,107
Reaction score
3,682
Location
Massachusetts
Looks like the tech used a ton of whatever grease they use to mount the tires and did not clean them after.
My tires looked pretty much like that yesterday after installation and right before the tech cleaned them.
I don't have nubs in my new tires either btw, and I am sure that mine are new.
If they were sure they were new they wouldn't be ordering new ones for OP though.
 

sessman

Well-Known Member
Joined
Jun 3, 2019
Messages
218
Reaction score
95
Location
San Diego, CA
To add one more layer to this, I drove to a reputable tire shop near me and asked their opinion. The guy looked at them, measured all tread depth in multiple areas of all 4 tires and they all read between 10-11/32. He said they're definitely new and that some tires don't come with the nubs anymore. He said they should have been cleaned but they definitely look new.

Now the dealer says my replacement tires will be in tomorrow. What would you guys do?
 

Dewey

Spends too much time on here
Joined
Mar 30, 2022
Messages
3,377
Reaction score
6,417
Location
WI
To add one more layer to this, I drove to a reputable tire shop near me and asked their opinion. The guy looked at them, measured all tread depth in multiple areas of all 4 tires and they all read between 10-11/32. He said they're definitely new and that some tires don't come with the nubs anymore. He said they should have been cleaned but they definitely look new.

Now the dealer says my replacement tires will be in tomorrow. What would you guys do?
Did you try cleaning them yet?

What happens if the new tires come in and look exactly the same?
 

sessman

Well-Known Member
Joined
Jun 3, 2019
Messages
218
Reaction score
95
Location
San Diego, CA
Did you try cleaning them yet?

What happens if the new tires come in and look exactly the same?
Not yet, was waiting to use my pressure washer on them and have to wait because I just had my truck ceramic done...that is my fear as well. What if this time they scratch a rim or something else happens and it wasn't even necessary.
 

Dewey

Spends too much time on here
Joined
Mar 30, 2022
Messages
3,377
Reaction score
6,417
Location
WI
Not yet, was waiting to use my pressure washer on them and have to wait because I just had my truck ceramic done...that is my fear as well. What if this time they scratch a rim or something else happens and it wasn't even necessary.
Pressure washing won’t do much. You need a spray on product to clean the rubber blooming. Money well invested because you’ll need it later anyway no matter which tire you have.
 

sessman

Well-Known Member
Joined
Jun 3, 2019
Messages
218
Reaction score
95
Location
San Diego, CA
Pressure washing won’t do much. You need a spray on product to clean the rubber blooming. Money well invested because you’ll need it later anyway no matter which tire you have.
I just bought the Adams stuff you recommended. Can't decide if I have them replace them or not...
 

CogitoErgoLevo

Active Member
Joined
Feb 24, 2021
Messages
183
Reaction score
254
Location
Los Angeles
Why don't you have the dealership clean the tires since they should have done it before. If they say no, then have them replace the tires.
 

Quark

Member
Joined
Jun 2, 2024
Messages
5
Reaction score
1
I’m sure it’s been mentioned, but I’m 95% sure that this is tire lube that the mounting shop slopped on your tires for mounting and didn’t wash off. Little soap and water will take it off.
 

Kiwiaudio

Well-Known Member
Joined
Oct 15, 2023
Messages
241
Reaction score
145
Location
Ohio
Some tires are worse than others with blooming but it seems to get better over time. Give them a good cleaning and see how they are in a few days. It’s something you will have to do regardless every so often no matter what tire you buy.

This is what I use but plenty of other good products out there that do the same thing.

Side note, and off topic, but that Adams cleaner is so good that you can dilute it 2 or 3 to 1 !
 

Brutal_HO

The Mad Irishman
Staff member
Site Supporter
Joined
Feb 11, 2020
Messages
1,417
Reaction score
2,739
Location
Douglas County, CO
Measure the tread depth they should be 11/32. That schmutz on the tire is mold release agent

This.

That type tire won't have big nubs. I see plenty of mold flash on there that indicates they're new.

1717435510041.png

Clean as suggested and move on. Thank the dealer for making it right, but let them sell the ordered set to someone else. Or they'll send them back. Done all the time.
 

Users who are viewing this thread

Top