What did you do to your Ram today???

[Repsol_Maker]

Where did you get the file to 3D print?

Thingiverse. Search ram bakflip mx4. Should pop right up. Their app is horrible otherwise I could get the exact link for you.


Sent from my iPhone using Tapatalk

 

[Nails]

Hopefully nothing... feeling little hungover this morning . Haha

 

[PorBoy]

Moved it from one side of my driveway to the other, it’s leg day for it lol...

 

[Coulds]

I added some Nerf Bars to my RAM

 

[Gondul]

New Year and starting clean.
Washed the RAM and the Subaru.

Meguiar's Ultimate Wash and Wax and an *old* bottle of Meguiar's Hi-Tech 26, Yellow wax.

 

[geotex1]

First oil change.

Glad I have a variety of odd oil filter removal tools as that it a darn tight spot to have a filter turned down by a gorilla to deal with!

Installed a Fumoto so next time will be easier!

Only two small metal flakes about 1/32" in the drained oil and very little powdered shavings - poured it over a magnet. Cut open the filter and had three flakes with the largest about 1/16" and the pleats definitely caught a little powder. Overall, way less than the break-in change of my 2014.

 

[iupui1299]

Mudflaps and Window Visors

 

[jamie.howlett]

First oil change.

Glad I have a variety of odd oil filter removal tools as that it a darn tight spot to have a filter turned down by a gorilla to deal with!

Installed a Fumoto so next time will be easier!

What model # was the Fumoto you put in ? I changed my oil today, and agree with you about that tight spot for the filter !

 

[Al Czervik]

New Year and starting clean

On the same page here, brother...

For me, it was the first time washing the RAM since bringing it home about a month ago. I'm normally pretty OCD keeping rigs clean, but between rain/snow and work, today was the first day that made sense... Just needed to wait until the thermometer climbed above 32F to get started. In any case, once I was done and regained the feeling in my claws hands, I snapped a couple pics:





Happy New Year everyone!

 

[Mikemike]

Mudflaps and Window Visors

Are those weather tech mud flaps? Also what brand visors? Do you like them both? I like the fit on your mudflaps.

 

[Hotrod ram]

Took it to the beach. Caught some fish. Ordered tow hooks, bed rails, and bed divider.

Bed divider is a great buy. Just got mine installed. Love the convenience of adjusting it and not having to use straps constantly. Worth every penny

 

[iupui1299]

Are those weather tech mud flaps? Also what brand visors? Do you like them both? I like the fit on your mudflaps.

They are the Weathertech mudflaps. Excellent fit. The visors are Mopar brand. I don’t Have any experience with other visors to compare but they look nice and have the Ram logo on them which I liked. I’d recommend.

 

[Gondul]

First oil change.

Glad I have a variety of odd oil filter removal tools as that it a darn tight spot to have a filter turned down by a gorilla to deal with!

Installed a Fumoto so next time will be easier!

Only two small metal flakes about 1/32" in the drained oil and very little powdered shavings - poured it over a magnet. Cut open the filter and had three flakes with the largest about 1/16" and the pleats definitely caught a little powder. Overall, way less than the break-in change of my 2014.

Yeah... gonna let the dealer fight that first change, and get some TSBs cleared up.
I've been considering the Fumoto... got a pic of it installed?

 

[geotex1]

What model # was the Fumoto you put in ? I changed my oil today, and agree with you about that tight spot for the filter !

I went with the adjustable 90 elbow because I attached a hose and left it in place clipped to the sway bar.

https://www.fumotooildrainvalve.com/f316l.html

You need this version or the long straight nipple. The short nipple will be a PITA to slip a hose on reliably with the sway bar.

Yeah... gonna let the dealer fight that first change, and get some TSBs cleared up.
I've been considering the Fumoto... got a pic of it installed?

No, I didn't. I'll have the truck back up on the ramps later this week and will grab a couple. Worked out great with the model I chose to keep a hose on it and tied up so it would not catch anything.

You might ask why leave the hose - I'm religious about changing on time, and that may mean I'm 4 states away with my trailer in tow. Whatever to make it easier! If it hadn't worked out so well, I was going to put a QC on it.

 

[jamie.howlett]

I went with the adjustable 90 elbow because I attached a hose and left it in place clipped to the sway bar.

https://www.fumotooildrainvalve.com/f316l.html

You need this version or the long straight nipple. The short nipple will be a PITA to slip a hose on reliably with the sway bar.

Thank you, and Happy New Year !

 

[TurdFerguson]

Placed an order for this... View attachment 12209

Gonna do an install thread?

 

[crabby_mcnasty]

Got around to filling bumper holes.

 

[Al Czervik]

^ nice work! Looks just as good as "Bumper Plugs" for a fraction of the cost. I did the same thing myself...

 

[RodRow]

I added my own Under-Seat storage and detailed how in the post linked below. It only took 30 minutes and I love the way it turned out. Perfect for me and only $9 (nine dollars).

https://5thgenrams.com/community/threads/rear-under-seat-storage-aftermarket-options.2556/post-75903

 

[Maric550]

Added a front chrome bug guard and chrome toolbox and 35s on stock lol waiting on the 6in lift to come in please pay no mind to the crappy positioned logos they are getting redone I was mad when I saw the outcome smh