Tazer dt lost sensors

[bnh105]

I changed the tire size and a couple small other things I did the full reboot and the two power cycles, I also unmarried , then remarried and did the full reboot again with two power cycles. For whatever reason I still have no front rear parking sensor available? Tire size is only 34.53 so under 35 which I know have people some issues. Any help would be greatly appreciated.

 

[djevox]

This may sound silly, but are the buttons below the infotainment for park sensors enabled?

Also, zauto is very responsive over email if you wanted to ask them.

 

[bnh105]

The light is on showing they are disabled , if i press to try and turn them on, my splash screen will say unavailable for front and rear

 

[djevox]

I guess it’s possible that the tazer corrupted some data on the BCM. I wonder if unhooking the battery and leaving it overnight will give you a different result.

 

[bnh105]

I guess it’s possible that the tazer corrupted some data on the BCM. I wonder if unhooking the battery and leaving it overnight will give you a different result.

That was my next step unhooking negative terminal for 20-30 minutes to let itself reset and see if that fixes it

 

[bnh105]

I guess it’s possible that the tazer corrupted some data on the BCM. I wonder if unhooking the battery and leaving it overnight will give you a different result.

Tried this to no avail, zauto isn’t helping much at this point either so pretty disappointed with the Tazer dt right now

 

[ramchaser]

Won't work...If you go over 2558mm with alphaobd...It disables park sense with no ETA for a fix per engineering. Only fix is to buy the cable that installs behind the cluster currently.

 

[Idahoktm]

Won't work...If you go over 2558mm with alphaobd...It disables park sense with no ETA for a fix per engineering. Only fix is to buy the cable that installs behind the cluster currently.

Not true. I used 2625mm's to reprogram my speedometer with AlfaOBD and my ParkSense still works.

 

[bnh105]

Won't work...If you go over 2558mm with alphaobd...It disables park sense with no ETA for a fix per engineering. Only fix is to buy the cable that installs behind the cluster currently.

I’m using Tazer though, not sure what that equates to , but haven’t used alphaobd

 

[UnclJim]

Won't work...If you go over 2558mm with alphaobd...It disables park sense with no ETA for a fix per engineering. Only fix is to buy the cable that installs behind the cluster currently.

what cable is this?

 

[MoreOvalteenPlz]

Won't work...If you go over 2558mm with alphaobd...It disables park sense with no ETA for a fix per engineering. Only fix is to buy the cable that installs behind the cluster currently.

Not true. I used 2625mm's to reprogram my speedometer with AlfaOBD and my ParkSense still works.

What Idahoktm said… I changed mine to 2672mm using AlfaOBD and my ParkSense works perfectly. Can’t speak for the Tazer or any number higher than than 2672mm though…

 

[ramchaser]

Absolutely will not work past what I stated on my Rebel with AlphaOBD or with the correct sales code when I use rebuild BCM reconfiguration with my WiTECH 2.

What Idahoktm said… I changed mine to 2672mm using AlfaOBD and my ParkSense works perfectly. Can’t speak for the Tazer or any number higher than than 2672mm though…

Not true. I used 2625mm's to reprogram my speedometer with AlfaOBD and my ParkSense still works.

Absolutely will not work past what I stated on my Rebel with AlphaOBD or with the correct sales code when I use rebuild BCM reconfiguration with my WiTECH 2.

 

[Idahoktm]

Absolutely will not work past what I stated on my Rebel with AlphaOBD or with the correct sales code when I use rebuild BCM reconfiguration with my WiTECH 2.


Absolutely will not work past what I stated on my Rebel with AlphaOBD or with the correct sales code when I use rebuild BCM reconfiguration with my WiTECH 2.

Then you're doing it wrong.

 

[ramchaser]

Then you're doing it wrong.

Maybe you could enlighten me then?

 

[Idahoktm]

Maybe you could enlighten me then?

Follow the steps in this video.

 

[ramchaser]

Follow the steps in this video.

Same steps I followed the first time as the video and still have disabled park sense with any value higher than 2557mm however mine is a 19 but can't think that would make a difference.

 

[HeliPilot]

I adjusted my tire size via Tazer to 35.39", Parking sensors disabled (Unavailable), 2021 TRX