What did you do to your Ram today???

[c3k]

I installed a volume knob and put on black lug nuts this weekend

I like the look. What wheels are those?

 

[Klicht87]

Thanks — no rubbing, and yea, these are the stock Wildpeaks. Wheels have a +1 offset so they poke out a little more than factory and sit flush with the wheel wells. I got them from WheelsAsap and you can negotiate with them. I think I paid $1,577 and they included a spline lug set and lifetime protection package.

FWIW, I think the matte black deflector would look really good on your truck even with the gloss below it.

Thank you! Great color combo. I'll have to check out that site.

 

[HemiDude]

Thanks — no rubbing, and yea, these are the stock Wildpeaks. Wheels have a +1 offset so they poke out a little more than factory and sit flush with the wheel wells. I got them from WheelsAsap and you can negotiate with them. I think I paid $1,577 and they included a spline lug set and lifetime protection package.

FWIW, I think the matte black deflector would look really good on your truck even with the gloss below it.

Those rims look really good on your truck!

 

[1lowcab]

I lowered it.
Maxtrac 2/4 drop.

 

[Ccroce]

Those rims look really good on your truck!

Thanks, man!

Chris

 

[Dogpatch]

My Bison Trifold Flipback Hard Surface Tonneau Cover I ordered showed up and I got it installed today. Very similar to the Bakflip Tonneau Cover I had on but you could tell the quality is better AND it doesn’t leak!
The bonus was it was almost 1/2 the price of the Bakflip one. I like it!

 

[Ldc2335]

Was planning on installing the side steps I ordered only to find out there are no factory mounting studs on the truck. Not exactly sure what to do at this point. Anyone have any suggestions?

Nutserts? Not sure of the weight limits on them

Or have them welded on? Or both.

Mardatt 130Pcs SAE 304 Stainless Steel Rivet Nuts Rivnut Assortment Kit Flat Head Threaded UNC Rivetnut Insert Nutsert Assort (#8-32#10-24 1/4"-20 5/16"-18 3/8"-16) https://www.amazon.com/dp/B08L94BXK...abc_3KDFWXDZG9M30QEPD8AH?_encoding=UTF8&psc=1

Sent from my Galaxy S21 Ultra using Tapatalk

 

[Idahoktm]

I like the look. What wheels are those?

Stock Night Edition Limited wheels.

 

[Ccroce]

Been messing with photoshop today wondering whether to make the bumpers body color. Adding chrome tow hooks eventually too.

 

[HEMIJAKE]

Actually did some work with it Saturday. My buddy's old man was looking to get rid of some old limbs laying on his property. I needed some fuel for the wood stove in the garage. So I put my son to work stacking wood ha. Not a huge amount, but enough to top off my supply. For now the trailer is backed in the garage. Gotta find time to split the bigger stuff and stack it all in the shed

 

[pmegason]

Bought my first Ram a few days ago! Had a '16 Tacoma and '20 R-Pod trailer.. got a '28 grand design Imagine trailer so had to upgrade truck Looked at going Rebel but couldn't find a used one with the diesel.. stoked to find this 2020 with only 9K miles! Any suggestions on trailer brake controller placement? Thanks
View attachment 105590 View attachment 105591

I ordered OEM integrated trailer brake controller off of Ebay for $160. I did the install my self. I still haven't done the activation with the alfaobd yet. The trailer brakes still work. I just can't see the read out on the dash.

 

[pmegason]

I plumbed them together. I ran the airline behind the driver taillight and installed the schrader valve in one of the rivenut holes inside the bed so I didn’t have to drill holes in the bumper.


Sent from my iPhone using Tapatalk

How much difference do the airbags make? I pulled my trailer for the first time this last weekend and it really had some bounce in the back end.

 

[2020GCM]

Not today but Saturday I installed the moderate B2 muffler and polished tips. I also plugged the holes in the resonators as others have done....I was surprised how much noise come out of those.

 

[HSKR R/T]

Car show on Sunday. No personal award, but the Nebraska Ram Club took home 2nd place for club participation

 

[DBUC]

Not today but Saturday I installed the moderate B2 muffler and polished tips. I also plugged the holes in the resonators as others have done....I was surprised how much noise come out of those.
View attachment 105974 View attachment 105975

Thinking about doing to same. Please upload a sound clip if you can, thanks!

 

[DBUC]

Installed the UnderCover Ultra Flex this morning. Happy with the results and the integrated Truck Hero LED bed light.

 

[FLiPMaRC]

My Bison Trifold Flipback Hard Surface Tonneau Cover I ordered showed up and I got it installed today. Very similar to the Bakflip Tonneau Cover I had on but you could tell the quality is better AND it doesn’t leak!
The bonus was it was almost 1/2 the price of the Bakflip one. I like it!

View attachment 105919
View attachment 105920

Very nice! Thanks for info. The price is great on this.

I have the Bed Utility Group and was wondering if this will have fitment issues with the tie down anchor rails.

 

[ferraiolo1]

10min $40 mod done.

Sent from my iPhone using Tapatalk

 

[riveralg79]

10min $40 mod done.

Sent from my iPhone using Tapatalk

Is there a video or photos showing the process on how this is done?


Sent from my iPhone using Tapatalk

 

[ferraiolo1]

Once you get the new switch in your hand you will see the three tabs you push from the back side. And it pops out


Sent from my iPhone using Tapatalk