Official Built to Serve Thread

[Grape_Ape]

Thought it would be pretty cool to get a collection of all the Built to Serve editions in one thread! I know there are a few lurking around the forums. I don't think all the branches have had their respective trucks hit lots yet. I searched and couldn't find one of these. If it does let me know or remove it!

Figured we could post up our trucks and mods so we might could see what we like!




Here's mine after getting the windows tinted at 15% in the front with a strip on the windshield. I'll probably get the rears done later to help with the heat in the summer. I installed some LEDs to help with reversing in the dark.



I also replaced all three dash speakers with Kicker CSC35s. With the rest of the Alpine system it sounds awesome!

Planned mods:
Borla 40353 in the next month or so
Hellwig Sway Bar
Level of some sort. Having the ORP makes me nervous. Keep going around and around on Mopar, Bilsteins, or Readylift w/ no preload.

Just wanna fit some bigger tires on there and I'll think it'll be done. Trying to keep it mostly stock since it's a special edition.

Look forward to hopefully seeing more trucks!

 

[mrbullred]

RC 2" level
Nitto 295 65r20's
Flowmaster Cat-back American Thunder
Tazer DT

Sent from my SM-N976V using Tapatalk

 

[BTS Warrior]

Picked up my "Gator" Built to Serve in March after I totaled my 08 Ram. I hated losing that lifetime powertrain warranty, but this is a better truck in every way!

 

[c0mbatVet]

Not much done to it. In-channel window visors from US Visors, Lasfit LED bulbs in the third brake light/cargo lights, and Lasfit LED's in the footwell lights. I did the Dura Coat tire coating and I have a Gator SFX tri fold tonneau on the way.

 

[Grape_Ape]

Not much done to it. In-channel window visors from US Visors, Lasfit LED bulbs in the third brake light/cargo lights, and Lasfit LED's in the footwell lights. I did the Dura Coat tire coating and I have a Gator SFX tri fold tonneau on the way.

Did you do a different color in the footwells or something?

 

[c0mbatVet]

Did you do a different color in the footwells or something?

No just regular white LED's. I have the Panoramic Sunroof also so the rest of my interior lights were already LED's and the halogen footwell lights looked funny to me being a softer color.

 

[Grape_Ape]

No just regular white LED's. I have the Panoramic Sunroof also so the rest of my interior lights were already LED's and the halogen footwell lights looked funny to me being a softer color.

Huh I'll have to check that out because I feel like my footwells are already led.

 

[BGC]

Hey guys, I’m in the BTS club too with a 2020 Bighorn I got about a month or so ago now. I really enjoy it and have done some of the modifications people discuss here and really enjoy learning about our trucks and sharing info...pretty cool topics on this forum. You can see my modifications in my signature, so won’t list them again but here are a couple of pictures.

 

[jdangel2]

RC 2" level
Nitto 295 65r20's
Flowmaster Cat-back American Thunder
Tazer DT

Sent from my SM-N976V using Tapatalk

Beautiful truck. I’m having the Mopar 2” lift put on next week and I’m supposed to get BFG AT 35x12.50R20 on the stock Laramie ORP wheel... I’m getting cold feet about them rubbing. Do you have any issues with yours? I do off-road often. Thanks!

 

[c0mbatVet]

For those with the black Built to Serve's I found gloss black precut wrap for the indents on the door handles. What do you guys think?

 

[BGC]

I like it - looks cool. Where did you find it? Assuming install was easy?

 

[c0mbatVet]

I like it - looks cool. Where did you find it? Assuming install was easy?

Yeah just cleaned the handle good, stick it on, and then hit it with a heat gun or hair dryer. https://www.luxeautoconcepts.net/collections/dodge-ram-products

 

[Grape_Ape]

Nice. I'm gonna be adding passive entry to my truck in the future.

 

[mrbullred]

Beautiful truck. I’m having the Mopar 2” lift put on next week and I’m supposed to get BFG AT 35x12.50R20 on the stock Laramie ORP wheel... I’m getting cold feet about them rubbing. Do you have any issues with yours? I do off-road often. Thanks!

Mine measure about 35.12" x 11.77". It hasn't rubbed yet. More than rubbing the fender you are gonna have to worry about it rubbing the upper ball joint with the factory wheels. Mine are awful close with the 11.77" width.

Sent from my SM-N976V using Tapatalk

 

[c0mbatVet]

Found this matte black flag decal set for the front RAM emblem on ebay. I think it looks pretty cool.

 

[c0mbatVet]

Today's quick little project was getting rid of the stupid chrome on the wheels. OEM black center caps and black colorlugs lug nut covers.

 

[Grape_Ape]

Looks good! I actually like the chrome but I'm probably biased. When I dipped my wheels/badges on my Mazda the lug nuts were the only thing I kept chrome lol.

Mazda 3

 

[c0mbatVet]

Looks good! I actually like the chrome but I'm probably biased. When I dipped my wheels/badges on my Mazda the lug nuts were the only thing I kept chrome lol.

Mazda 3

My last truck was chrome'd out, just looking for something different.

 

[Skater]

Not much done to it. In-channel window visors from US Visors, Lasfit LED bulbs in the third brake light/cargo lights, and Lasfit LED's in the footwell lights. I did the Dura Coat tire coating and I have a Gator SFX tri fold tonneau on the way.View attachment 60672

Are those WildPeak A/Ts loud at highway speeds? They look great on your Ram.

 

[c0mbatVet]

Are those WildPeak A/Ts loud at highway speeds? They look great on your Ram.

No, the road noise in this truck does not seem any noticeably louder than either of my prior trucks which were on Wrangler SR-A all seasons and Dueler H/L Alenza all seasons.