Glass or Plastic

[Nibis]

Anyone know if the part above and below the rear sliding glass window is glass or plastic?

 

[392DCGC]

Plastic.

 

[Nibis]

Shoot, I noticed a little over spray from the LineX

 

[KRField]

Shoot, I noticed a little over spray from the LineX

You can remove it with a razor blade, like the ones for window scrapers. Before using the blade round the corners off real good with sand papers. Then spray some glass good with a glass cleaner and run each side of the blade at an angle 20 times or so each side. This deburrs the edge. Then spray a liberal amount of spray detailer on the plastic and gently scape the LineX off with the blade at roughly a 30 degree angle of less.


Sent from my iPhone using Tapatalk

 

[Nibis]

Its on the plastic part below the sliding window, there was a tiny amount on the glass, that was easy to remove. I'd be nervous trying to scrape it off plastic with a razor blade

 

[MannymanX]

Its on the plastic part below the sliding window, there was a tiny amount on the glass, that was easy to remove. I'd be nervous trying to scrape it off plastic with a razor blade

I wouldn't. It's black on black... No one but you will know it's there.

 

[392DCGC]

Its on the plastic part below the sliding window, there was a tiny amount on the glass, that was easy to remove. I'd be nervous trying to scrape it off plastic with a razor blade

The instructions KRField posted are spot on. I've used a razor blade on paint in the exact same manner to remove really stubborn contaminants that clay wouldn't get off. Just follow the instructions, be gentle, and you'll be fine.