Reverse lights

[Damion]

Is it just me or are the reverse lights non existent? The led ones on my sport are barely seen in either the camera or the mirrors .

my old ‘16 reverse lights weren’t the greatest but were much better than the ones on my ‘19. I’m probably going to end up adding some under the bumper .

anyone else have this issue?

 

[PorBoy]

No it isn’t just you, I’ve posted about this being the reason why I don’t have matching tint on my front windows.

 

[kittyjo]

Is it just me or are the reverse lights non existent? The led ones on my sport are barely seen in either the camera or the mirrors .

my old ‘16 reverse lights weren’t the greatest but were much better than the ones on my ‘19. I’m probably going to end up adding some under the bumper .

anyone else have this issue?

License plate reverse light... thinking about getting it.. u shud look it up lots of reviews on it

 

[Neurobit]

License plate reverse light... thinking about getting it.. u shud look it up lots of reviews on it

Wait until they come out with a redesign. The current ones are too thick for our trucks and rub on the tailgate when down. New model supposed to come out in the fall.

 

[kittyjo]

Wait until they come out with a redesign. The current ones are too thick for our trucks and rub on the tailgate when down. New model supposed to come out in the fall.

True I’ve read that I’m waiting for all the kinks to get out... waiting for bilstein shocks air bags helpers, bigger tires.

 

[deanfx]

Waste 20 minutes and watch this.

 

[Neurobit]

Waste 20 minutes and watch this.

Not crazy about having to drill holes on my bumper...
Cheers

 

[Jonathan19Limited]

Wait until they come out with a redesign. The current ones are too thick for our trucks and rub on the tailgate when down. New model supposed to come out in the fall.

It actually takes minimal effort to make it fit without rubbing, and still look flawless. See my post below:

License Plate Reverse light

Dang, this has turned out to be an expensive experiment, I think vleds needs to identify known vehicles on web site that their products don’t fit

5thgenrams.com

 

[Neurobit]

It actually takes minimal effort to make it fit without rubbing, and still look flawless. See my post below:

License Plate Reverse light

Dang, this has turned out to be an expensive experiment, I think vleds needs to identify known vehicles on web site that their products don’t fit

5thgenrams.com

Good fix. I just didn't want to drill unnecessary holes or have to modify license plates. For what we paid for these, they should be plug & play in my opinion.
Mine went back and I'll get another once they come out with the redesign.

Thanks

 

[deanfx]

Not crazy about having to drill holes on my bumper...
Cheers

Yeah, me either. But those little lights are pretty badass

 

[Zeeya]

www.vleds.com. LPR LED Back up light. 30 min install.
I used the black wire off of 7 pin plug which is reverse light, white wire is ground. Spliced in and taped wiring back up and tie wrapped. Not cheap, but well worth it. I work out in W Texas 2 and 2 schedule. When working nights and backing up on locations and it’s tough seeing equipment stacked on edge of location, this took care of it. Have had it about 1.5 years. Took it off 17 KR when I traded it in and installed on this truck. Advertised as 1800 lumens and I wouldn’t doubt it

 

[Neurobit]

www.vleds.com. LPR LED Back up light. 30 min install.
I used the black wire off of 7 pin plug which is reverse light, white wire is ground. Spliced in and taped wiring back up and tie wrapped. Not cheap, but well worth it. I work out in W Texas 2 and 2 schedule. When working nights and backing up on locations and it’s tough seeing equipment stacked on edge of location, this took care of it. Have had it about 1.5 years. Took it off 17 KR when I traded it in and installed on this truck. Advertised as 1800 lumens and I wouldn’t doubt it

Yeah, miss my LPR. Can’t wait to get another once they release the correct model for our trucks (tried upside down but it looked goofy to me).

 

[Zeeya]

Guys/Gals, everything about the light is true, but just found out the tailgate touches it when down.
Don’t order them. Never realized it. Small mark on tailgate where it touches. Sorry

 

[retho78]

I did this mod and works great for me.

Reverse light mod

Due to the poor lighting with the LED reverse light, I tried this today and pretty happy with the results. Let me know your thoughts... thanks! I don't plan on towing and if I have to, then it can be easily removed as I have installed quick disconnect connectors on the wires. The hardest part...

5thgenrams.com

 

[Martinwelsh]

License plate reverse light... thinking about getting it.. u shud look it up lots of reviews on it

I have it ,works

 

[kittyjo]

Does putting exterior light on truck void warranty?

 

[Zeeya]

Does putting exterior light on truck void warranty?

No, unless someone wired it wrong and shorted something out.

 

[NJMonark]

Just added the VLEDS LPR to my 2020 Limited also (I removed the plastic dealer license plate holder). No interference with the tailgate at all.