What did you do to your Ram today???

[retho78]

Installed Tecoom splash guards today. The details are in the link below.

Mud Flaps

Installed the Tecoom brand splash guards today. They look similar to the husky splash guards but cheaper. They come with additional screws but no protective film to install between the fender flares and splash guards. However, I had some carbon fiber vinyl wrap sitting around so used that...

5thgenrams.com

 

[Gozar]

Switched out base dash speakers with a pr of CSC35 Kickers, sound is much improved! Put in a K&N filter. Tomorrow I install my Ionic 5” chrome and black nerf bars.

 

[retho78]

Switched out base dash speakers with a pr of CSC35 Kickers, sound is much improved! Put in a K&N filter. Tomorrow I install my Iconic 5” chrome and black nerf bars.
View attachment 31388View attachment 31387View attachment 31386

Are the speakers direct fit or any modifications required?

 

[Gozar]

Are the speakers direct fit or any modifications required?

Direct fit with the metra wiring harness, you cannot get the polarity wrong as the wires only fit one way. Pop the cover, use a 7mm socket to remove two screws, replace-tighten-push the cover back on. 15min per speaker tops. It is a tight fit if you have big hands, otherwise a simple job.

 

[retho78]

Direct fit with the metra wiring harness, you cannot get the polarity wrong as the wires only fit one way. Pop the cover, use a 7mm socket to remove two screws, replace-tighten-push the cover back on. 15min per speaker tops. It is a tight fit if you have big hands, otherwise a simply job.

Thanks

 

[LNDRCKT]

Lifted or leveled? And which one did you use? Looks good. Thanks!

I used the day star leveling blocks for the Gen 4 truck. Then I adjusted the sensor brackets till I liked the level of the front. The rear is all stock. I also added 1.25” stahl wheel spacers. A little heat on the front plastic liners and I was all good to go!

 

[Bigcountry]

New 6” LED lighting installed

https://uploads

.


Sent from my iPhone using Tapatalk

Looks awesome! How was the install?

 

[Megafandrew]

I tinted the front windows to match the rear factory, and removed the dealer decals off the back window lol.

 

[Lize]

Done over 1,000 miles now so decided to install the Pedal Commander. Just wanted to get a few miles on to get fully used to it before making changes.

So, popped it straight into Sport+ 4 and off I went. Absolutely brilliant!!!

I’d never have thought it would make such a difference, before it felt like you pressed the throttle and nothing was happening, now even feathering the throttle gives rapid revs and rpms continue to climb without full throttle.

Might turn it down a bit if I’m crawling traffic, was a bit jerky at one point but I don’t often carry passengers and I’ll get used to it.

Stopped off for a coffee a couple miles from home but so excited about it decided to make this post before longer test ride

 

[DonsRam19]

Sorry, new ram owner and new to forum. What type of leveling kit did you use because I am struggling on making this decision. Truck setup looks great!

2.5" motofab top hat spacers.

 

[Gozar]

Installed a pair of Ionic 5” Stainless Curved Nerfbars.

 

[Caballonegro]

Switched out base dash speakers with a pr of CSC35 Kickers, sound is much improved! Put in a K&N filter. Tomorrow I install my Ionic 5” chrome and black nerf bars.
View attachment 31388View attachment 31387View attachment 31386

Now you have to cut out the white fabric above, it is super restrictive.

 

[DonsRam19]

Just installed some tow hooks makes these trucks look so much better!

 

[WA-G]

Installed the RetraxOne MX today and a tailgate seal. Simple, easy and looks great!

 

[Repsol69]

Installed the RetraxOne MX today and a tailgate seal. Simple, easy and looks great!

Tail gate seal?? Why?


Sent from my iPhone using Tapatalk

 

[spaightlabs]

Tail gate seal?? Why?


Sent from my iPhone using Tapatalk

Cuz they do a great job at keeping dust and water out with a topper or tonneau cover.

 

[Gozar]

Now you have to cut out the white fabric above, it is super restrictive.

White fabric?
There was nothing between the speaker and the plastic cover.

 

[Repsol69]

Cuz they do a great job at keeping dust and water out with a topper or tonneau cover.

Where do u get these ?? Is there a part number or are they aftermarket??


Sent from my iPhone using Tapatalk

 

[rrbhokies]

White fabric?
There was nothing between the speaker and the plastic cover.

I think he means on the top of the air filter box cover. I saw it in the picture. There is some kind of white mesh in cover that he is recommended taking out. That's the first I've heard anyone mention that, so it would be good to confirm that it's ok to do that.

 

[rrbhokies]

Installed my Mopar window deflectors. Not too hard to install, although those clips can be a bugger to line up just right. All in all though, they seem to fit well and look good.