Yet another Ram 1500

[Arlo1782]

This is my 2020 Ram 1500 Bighorn Night Edition. I have the BDS front upper control arms with the FOX Performance Elite 2.5 Remote Reservoirs w/DSC Adjuster, Rear is the FOX Performance Elite 2.5 w/DSC Adjuster as well. This is sitting pretty on Fuel Rebel Bronze/Black 18x9 -12 offset wheels and wrapped in 33" x 12.5" Nitto Ridge Grapplers. I have an RSI Smartcap EvoC with the full drivers side bin. On top is the Roofnest Condor XL. In the bed I have the Bedslide 1000CL. I wanted a couple more strap down points so I machined a couple of over kill flanges out of stainless and I have removable eyebolts. I also have a lock'er down center console safe. I know there will be more to come! Thanks

 

[Arlo1782]

Here are the rest of the photos!

 

[Biggiehorn]

Very nice setup! And that RoofNest is sweeeet! Looking forward to following along for future mods and updates.

 

[Arlo1782]

Thanks, I'm really diggin your build as well. Love the headlights!

 

[Arlo1782]

I did these earlier this year. Stinger magnetic mount with trigger guard and the Lock'er Down center console safe!

 

[MannyN]

Did the same thing with a right handed IWB holster, works great.

 

[mac-oly]

Very nice! I'm really leaning towards the same suspension setup. What lug nuts are those?

 

[Arlo1782]

Very nice! I'm really leaning towards the same suspension setup. What lug nuts are those?

They are the sickspeed 3 piece!

 

[Arlo1782]

Was working on the removable mounts for the cooler. And my case finally came in for my bow after a couple months of waiting! Figured I would post a couple photos of the bow/case and the cooler with mounting eyebolts!

 

[Arlo1782]

Man I love fall, but I'm feeling super bummed to be putting this little beauty away. I love cruising around on it! And it just looks good sitting with a couple Rams!!!

 

[Arlo1782]

Went camping this past weekend up in the northwoods, got the Amp Research steps installed just before I left!

 

[Arlo1782]

So I bought a new bike the other day, and with a new bike comes a super cool bike hitch. Probably not as cool as what some are doing to their truck, but it is still neat to me! It's a Kuat NV 2.0. I'm going to have to get an adapter to lower it a bit, or get a swing away for it. Even with the bike off I can't access the the bed fully.

 

[Arlo1782]

Installed the Air Lift LoadLifter 5000 Ultimate Plus, along with the Wireless Air 2nd gen. I have a lot of weight on the back and thought this would help a bit!

 

[Rick3478]

Installed the Air Lift LoadLifter 5000 Ultimate Plus, along with the Wireless Air 2nd gen. I have a lot of weight on the back and thought this would help a bit!

View attachment 157107View attachment 157106

It should help reduce sag. Don't forget the axle still has half ton bearings. Air lines are on the bottom of the bags? I wasn't expecting that. Route the lines up the trailing arms? Thanks for photos, helps the rest of us learn.

 

[Arlo1782]

It should help reduce sag. Don't forget the axle still has half ton bearings. Air lines are on the bottom of the bags? I wasn't expecting that. Route the lines up the trailing arms? Thanks for photos, helps the rest of us learn.

The air lines are on the top of the bags this is just a before I ran them photo!

 

[Arlo1782]

Took a trip out to Colorado to visit friends and family.... Unfortunately didn't get to do more stuff in the mountains!