5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Arlo1782

Member
Joined
Mar 26, 2021
Messages
18
Reaction score
49
This is my 2020 Ram 1500 Bighorn Night Edition. I have the BDS front upper control arms with the FOX Performance Elite 2.5 Remote Reservoirs w/DSC Adjuster, Rear is the FOX Performance Elite 2.5 w/DSC Adjuster as well. This is sitting pretty on Fuel Rebel Bronze/Black 18x9 -12 offset wheels and wrapped in 33" x 12.5" Nitto Ridge Grapplers. I have an RSI Smartcap EvoC with the full drivers side bin. On top is the Roofnest Condor XL. In the bed I have the Bedslide 1000CL. I wanted a couple more strap down points so I machined a couple of over kill flanges out of stainless and I have removable eyebolts. I also have a lock'er down center console safe. I know there will be more to come! Thanks 1.5.jpg 2.5.jpg 3.5.jpg 4.5.jpg 5.5.jpg 6.5.jpg 7.5.jpg 8.5.jpg 9.5.jpg 10.5.jpg
 
Last edited:

Arlo1782

Member
Joined
Mar 26, 2021
Messages
18
Reaction score
49
Was working on the removable mounts for the cooler. And my case finally came in for my bow after a couple months of waiting! Figured I would post a couple photos of the bow/case and the cooler with mounting eyebolts!
20.jpg 21.jpg 22.jpg
 

Arlo1782

Member
Joined
Mar 26, 2021
Messages
18
Reaction score
49
Man I love fall, but I'm feeling super bummed to be putting this little beauty away. I love cruising around on it! And it just looks good sitting with a couple Rams!!!
23.jpg 24.jpg
 

Arlo1782

Member
Joined
Mar 26, 2021
Messages
18
Reaction score
49
So I bought a new bike the other day, and with a new bike comes a super cool bike hitch. Probably not as cool as what some are doing to their truck, but it is still neat to me! It's a Kuat NV 2.0. I'm going to have to get an adapter to lower it a bit, or get a swing away for it. Even with the bike off I can't access the the bed fully.
30.jpg 31.jpg 33.jpg 32.jpg 34.jpg
 

Arlo1782

Member
Joined
Mar 26, 2021
Messages
18
Reaction score
49
Installed the Air Lift LoadLifter 5000 Ultimate Plus, along with the Wireless Air 2nd gen. I have a lot of weight on the back and thought this would help a bit!

36.jpg 35.jpg
 

Rick3478

Ram Guru
Joined
Mar 3, 2022
Messages
1,326
Reaction score
1,566
Location
NW OH
Installed the Air Lift LoadLifter 5000 Ultimate Plus, along with the Wireless Air 2nd gen. I have a lot of weight on the back and thought this would help a bit!

View attachment 157107 View attachment 157106
It should help reduce sag. Don't forget the axle still has half ton bearings. Air lines are on the bottom of the bags? I wasn't expecting that. Route the lines up the trailing arms? Thanks for photos, helps the rest of us learn.
 

Arlo1782

Member
Joined
Mar 26, 2021
Messages
18
Reaction score
49
It should help reduce sag. Don't forget the axle still has half ton bearings. Air lines are on the bottom of the bags? I wasn't expecting that. Route the lines up the trailing arms? Thanks for photos, helps the rest of us learn.
The air lines are on the top of the bags this is just a before I ran them photo!
 

Users who are viewing this thread

Top