I am needing some help on how to wire the 6 pin male subwoofer plug. The how to wire it in to the ANC module. I have read somewhere on here just not positive how to go about it.?
[email protected]SRy, I didn't realize the uploads posted them inline instead of attachments. PM me your email and I'll send direct if you want.
Did You managed to connect? I am thinking about the same solution.Please send it I would like to try and wire it today or tomorrow thank you.
Not sure it'll have what your looking for, but here the site to get the part numbers to repair the connectors: http://connectors.dcctools.com/home.htm@Jimmy07 do You know where to get 6 pin connector for Alpine subwoofer and how to hook it up to 2 pin aftermarket sub directly, without amp? Thank You!
Very good, thank You! Mopar 68186565AA.Not sure it'll have what your looking for, but here the site to get the part numbers to repair the connectors: http://connectors.dcctools.com/home.htm
Ok, 69030094AA is a male for Mopar 68186565AA female (fitted on sub), If I follow attached drw correctly, I can hook up to any pairs: 1-2, 3-4, 5-6. https://www.ebay.com/itm/233661154960?hash=item36674a4690:g:sqQAAOSw03lY55a~The connector Mopar 6pin harness is 69030094AA this is for subwoofer 68277288AB the you wire in to t taps on the Black connector anc module under the drivers seat PIN number #5 and #13 that’s the left rear + & - that’s the way I was told to do it and it does sound pretty good.