5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Wheels 22"

TAK

Active Member
Joined
Jan 7, 2021
Messages
53
Reaction score
56
Points
18
Age
78
Location
South West Florida
looking to upgrade my stock 20 inch wheels to 22" Like to keep stock stance...I have looked at tire rack and did not see anything that I liked so far. Where are all you getting your aftermarket wheels? Suggestions please.
 
I've been on here maybe 3 times since I bought my 2020 crew cab, short bed, midnight edition. Like you, I am wanting to beef up the factory 20" to 22" wheels. I am looking for the "flush" offset, which is just mildly different than stock. Also live in SW FL, so curious who others recommend.
 
For flush, you’ll be looking roughly at a 22x10 at +1 offset.
I started learning what our options are for flush on americantrucks.com, then take that offset and width over to customwheeloffset.com to get an idea of possibilities.

That being said, I’m really liking the Strada Retro 5 in 24x10. I just don’t know if 24’s will look too big if I don’t do a lift.
 
For flush, you’ll be looking roughly at a 22x10 at +1 offset.
I started learning what our options are for flush on americantrucks.com, then take that offset and width over to customwheeloffset.com to get an idea of possibilities.

That being said, I’m really liking the Strada Retro 5 in 24x10. I just don’t know if 24’s will look too big if I don’t do a lift.

Excellent info djevox. Much appreciated!
 
For flush, you’ll be looking roughly at a 22x10 at +1 offset.
I started learning what our options are for flush on americantrucks.com, then take that offset and width over to customwheeloffset.com to get an idea of possibilities.

That being said, I’m really liking the Strada Retro 5 in 24x10. I just don’t know if 24’s will look too big if I don’t do a lift.
24x10 looks fine, I have a 4/6 drop and it fills it up just right in my opinion.
 

Attachments

  • image0.jpeg
    image0.jpeg
    117.8 KB · Views: 67
24x10 looks fine, I have a 4/6 drop and it fills it up just right in my opinion.
That does look amazing lowered! I have a 4x4 with a reverse level (front stock and rear lowered 2” when I install the springs tomorrow) and would want at least 35 aspect ratio tires. Not sure if the fenderwell gaps would look weird. I think a lot of wheels look strange until a truck gets lowered.
 
That does look amazing lowered! I have a 4x4 with a reverse level (front stock and rear lowered 2” when I install the springs tomorrow) and would want at least 35 aspect ratio tires. Not sure if the fenderwell gaps would look weird. I think a lot of wheels look strange until a truck gets lowered.
If motorcycle racing wasn't so expensive, I would defiantly have a Long travel and 37" like MCD or Kibbe. I would love to have the funds to have McNeil do a one piece front end and some big hips for the bed.
 
My truck came with 22s and that was the first thing I got rid of. I'm running 20s with KO2s. Those sidewalls are way too thin for the places I drive.
 
My truck came with 22s and that was the first thing I got rid of. I'm running 20s with KO2s. Those sidewalls are way too thin for the places I drive.
What did you do with your 22’s?
 
Sold them on Marketplace. I also hated the way they looked, not sure why Ram hasn't changed them in 3 years now.
Thanks for responding. I actually like the polished and gunmetal 22’s a lot, so I’m still looking for an affordable set. If I’m going to pay almost $3k, then I’ll get something like this instead

384162D6-F9FF-4A00-A95B-4A0BFE8C0EDE.jpeg
 
You guys make me want too buy two sets....one polished and one black. LOL
You could do polished on the left and black on the right. It’ll be like a different truck depending on which side you look at, lol
 
You could do polished on the left and black on the right. It’ll be like a different truck depending on which side you look at, lol
Thats funny I wonder if anyone has done that! It would be a kick!!
 
Thats funny I wonder if anyone has done that! It would be a kick!!
That and painting cars half and half has been popular around here for years, especially on Hondas and Nissans. It’s usually not done tastefully though.
 
To each his own,
I searched all over for a Laramie with 18's because for my driving those 20 an 22's are completely worthless.
Then I purchased a second set of 18's to mount my snow tires on and I'll likely go narrower then stock for those tires,
looking at 255/70-18's or possibly 265/70-18's those low profile super wides tires are about useless to me.
 

Users who are viewing this thread

Back
Top