Wheel Spacers??

[Mksrt]

http://www.motorsport-tech.com/special/truck/dodge_s

Choose the 2019 ram 1500 in the drop down box. Make sure the center bore is 77.8mm and lug pattern is 6 on 5.5, all options from 1.00" to 4.00" will come up

Thank you very much I really appreciate it

 

[EJ_Reynolds]

Have anyone towed with the 2 inch spacers on? Figuring it would be safe but don't want to risk it and rather to be safe then sorry.

 

[jloops]

Have anyone towed with the 2 inch spacers on? Figuring it would be safe but don't want to risk it and rather to be safe then sorry.

Check out this video from the founder of Custom Offsets who only sell Bora spacers

 

[RamSport]

Would a .25" spacer work for 295?

 

[Billet1500 4x4]

Would a .25" spacer work for 295?

Are you concerned the 295 won't clear the UCA?

 

[RamSport]

Tried to have my 295's installed and they were rubbing on my ball joints.

 

[Billet1500 4x4]

Tried to have my 295's installed and they were rubbing on my ball joints.

That's surprising, other guys have put 305s on the stock wheels and cleared the uca, it's pretty tight but cleared by about 1/4". Are you running 18 or 20 inch wheels?

 

[ajosephngs]

I know I’m asking for it... but what’s the reality of 1.5” spacers causing serious wear on the bearings and what not. I don’t want to undermine the truck’s design for a minor visual improvement and I see some folks jump in to talk about how bad spacers are but there’s no shortage of guys running them. Are they really that bad? Seems like folks either love them or hate them which usually means misinformation somewhere along the line.

 

[RamSport]

20's

 

[Javi1782]

Do you have side shot of the truck with the spacers on?

 

[Leif_Ram2019]

I went with 1.5" Bora's on all four corners. Very happy with the results. This is the off road package suspension + 2" ReadyLift Level front & 1" spacer rear. Tires are 295/70R18 (34.3")

 

[Billet1500 4x4]

I went with 1.5" Bora's on all four corners. Very happy with the results. This is the off road package suspension + 2" ReadyLift Level front & 1" spacer rear. Tires are 295/70R18 (34.3")

Looks perfect, are you running the 4 ply version of the G2's or the LT's? Whats your fuel economy like, I seriously considered doing the 295 70 18 4 ply G2s or 305 55 20 4 ply G2s. Ended up staying conservative with 275 60 20.

 

[Leif_Ram2019]

Looks perfect, are you running the 4 ply version of the G2's or the LT's? Whats your fuel economy like, I seriously considered doing the 295 70 18 4 ply G2s or 305 55 20 4 ply G2s. Ended up staying conservative with 275 60 20.

I’m not quite sure. I went with the lighter option. Mileage isn’t great. I only have 1k miles on the truck so far and it’s mostly city. So not a big sample set.




Sent from my iPhone using Tapatalk

 

[11B4X4]

Would a .25" spacer work for 295?

I am running a 3/8" BORA spacer to make a little extra room for 295/65 on stock 20's. Plenty of lug left and and added plenty of UCA clearance, although I cleared those tires without the spacer maybe from my lift. I'm having new wheels put on tomorrow and may no longer need the spacer. I'll put them on the forum for sale if I decide to not run them anymore. But i'm glad I didn't go with 1/4", because it just wouldn't have been enough spacer to make the cost worth it.

 

[chad202]

I put 1/4" spacers. I have 22x10 wheels with +25 offset and 305/45 all season tires.

 

[MValdez]

can anyone provide a link to the 1/4" spacers you are using?

 

[chad202]

Ebay

 

[MValdez]

Ebay

View attachment 25231View attachment 25231

Thank you for posting these. I have Question pertaining to these.. If I put these on will my aftermarket wheels's ceramic hub rings still fit flush against the wheel bore?

 

[chad202]

I don’t see why not but they are cheap enough to buy and try.

 

[MValdez]

I don’t see why not but they are cheap enough to buy and try.

Good point!