What did you do to your Ram today???

[Maverik259]

No quick fix. Either buy a new seat cover or you can try a repair place. I'm getting mine repaired again after the first one came off. Company called Fibernew. I have a warranty on my seats from a protection package I had done when I first got it.

Did you get that from the dealer when you bought it? I got the same thing. Didn’t expect it to do anything to protect the outside and inside for $1000 but for lifetime warranty on damage to the leather on my tungsten and paint damage from the elements I couldn’t turn it down. I add my own ceramic coating topper because I didn’t trust theirs lol.


Sent from my iPhone using Tapatalk

 

[Maverik259]

Side note. In pursuit of my disdain for chrome. I added some black vinyl to the chrome emblems.

Sent from my iPhone using Tapatalk

 

[RAM Patriot]

Side note. In pursuit of my disdain for chrome. I added some black vinyl to the chrome emblems.

Sent from my iPhone using Tapatalk

Looks Good!!!

You might want to try the door handle insert: RAM 1500 Door Handle Insert Kit

 

[Ready Go]

Hit a milestone today!
View attachment 211109

It does take some work to only get 8 MPG, but great job, congrats!
Oh, my bad, you meant you made it to 23 MPH finally, also congrats!
I'll stop now before I get haters that don't get my humor!

 

[HSKR R/T]

Did you get that from the dealer when you bought it? I got the same thing. Didn’t expect it to do anything to protect the outside and inside for $1000 but for lifetime warranty on damage to the leather on my tungsten and paint damage from the elements I couldn’t turn it down. I add my own ceramic coating topper because I didn’t trust theirs lol.


Sent from my iPhone using Tapatalk

No, local detail shop. Mine is a 7 year guarantee

 

[Maverik259]

Looks Good!!!

You might want to try the door handle insert: RAM 1500 Door Handle Insert Kit

Not sure how this will look on forged blue their pictures are hard to decipher exactly what this is.


Sent from my iPhone using Tapatalk

 

[HemiDude]

Side note. In pursuit of my disdain for chrome. I added some black vinyl to the chrome emblems.

Sent from my iPhone using Tapatalk

I did that to the letters on my last Ram, I think it actually looks pretty good with the shiny edges.

 

[Jako]

I did that to the letters on my last Ram, I think it actually looks pretty good with the shiny edges.

I agree, bought them in silver billet but haven't installed as I think I would prefer granite crystal for more contrast.
Part of the bucket list, which I could probably get more "check offs" if I stayed off this forum.

 

[MarPar]

Side note. In pursuit of my disdain for chrome. I added some black vinyl to the chrome emblems.

Sent from my iPhone using Tapatalk

Where did you get the letters?

 

[Maverik259]

Where did you get the letters?

Etsy


Sent from my iPhone using Tapatalk

 

[CHeYeNNe71]

Where did you get the letters?

Here's another place I've bought from

Ram

Easily enhance the look of your existing Ram emblems with our quality emblem overlay decals. Orders over $12 ship free!

www.reflectiveconcepts.com

 

[HSKR R/T]

Where did you get the letters?

www.theoverlayguy.com

 

[skid_valve]

Got a lot done to my ram in the last day or so, I swapped out my 3in cluster for a 7in one and updated the milage. Protip novus 2 fine scratch remover works wonders for cleaning up the gauge cluster plastic.
Only complaint I have is the numbers before and after on the rolling indicators center left and center right are kinda dark and hard to see. Other than that I love it feels way nicer than the 3in.
I also discovered the alpha obd thread and enable the vehicle theft alarm, headlight drop out, tail gate ajar and extra menus!

After that I stumbled upon the jscan key fob programming so for $112 ($80 fob+$25 jscan+$7 hardware store key cut) I added the second key fob I bought when I bought the truck. The lock smith wanted $280 for everything so i saved some money too.

This fob also has the tailgate open button that my other one doesn’t have which is nice.

I just got the bearings in to fix my etorque along all the parts to add adaptive cruise and rain sense wipers so those are my next two projects.

 

[DrewR1993$$$]

Had her cleaned and salt taken off now into garage for the upcoming snow event love my truck 60K miles brought her with 15K miles, installed a few limited trim pieces and steering wheel love it Borla Atak Exhaust, Night edition rims, full tint all around and ceramic coated this past summer and interior full detail and had all the chrome deleted, and the sport hood installed looking for the limited radio bezel tried the Uconnect5 upgrade could not get it to work might need a new module, got help and wires from Jimmy. Love the upgrade potential on these trucks

 

[HemiDude]

Got a lot done to my ram in the last day or so, I swapped out my 3in cluster for a 7in one and updated the milage. Protip novus 2 fine scratch remover works wonders for cleaning up the gauge cluster plastic. View attachment 211182
Only complaint I have is the numbers before and after on the rolling indicators center left and center right are kinda dark and hard to see. Other than that I love it feels way nicer than the 3in.
I also discovered the alpha obd thread and enable the vehicle theft alarm, headlight drop out, tail gate ajar and extra menus!

After that I stumbled upon the jscan key fob programming so for $112 ($80 fob+$25 jscan+$7 hardware store key cut) I added the second key fob I bought when I bought the truck. The lock smith wanted $280 for everything so i saved some money too.
View attachment 211184
This fob also has the tailgate open button that my other one doesn’t have which is nice.

I just got the bearings in to fix my etorque along all the parts to add adaptive cruise and rain sense wipers so those are my next two projects.

Sounds like you have a lot going on. Let us know how the bearing replacement goes

 

[Maverik259]

AWE exhaust added today. As well as the course phone mount and bullet mount for my radar.

Sent from my iPhone using Tapatalk

 

[skid_valve]

Sounds like you have a lot going on. Let us know how the bearing replacement goes

Will do I seem to have caught it early as you can hear the bearing is going bad but it hasn’t actually failed. So hoping it’s an easy fix

 

[Dales 22 Ram]

Went to the auto show in Detroit with my neighbor. It was ok, doesn't seem like any of the manufacturers are even trying anymore everything seems boring and nothing new and exciting. But I will so they are pushing the EV's like there the next PB&J flavor. NO Thanks.

 

[HSKR R/T]

Went to the auto show in Detroit with my neighbor. It was ok, doesn't seem like any of the manufacturers are even trying anymore everything seems boring and nothing new and exciting. But I will so they are pushing the EV's like there the next PB&J flavor. NO Thanks.

Most manufacturers have pulled back from EVs, other than the EV car companiesike Tesla, Lucid, rivian. And most auto shows anymore are basically just cars from local dealer lots. You don't get many concept or pre-production cars being shown off anymore

 

[HemiDude]

Went to the auto show in Detroit with my neighbor. It was ok, doesn't seem like any of the manufacturers are even trying anymore everything seems boring and nothing new and exciting. But I will so they are pushing the EV's like there the next PB&J flavor. NO Thanks.

Pushing bc they have to, spent so much money on r&d and production they have no choice