5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Want to add JL Stealthbox and amp to Alpine.

Jason605

Active Member
Joined
Dec 14, 2020
Messages
90
Reaction score
68
Points
18
Age
52
I want to add the JL Stealthbox and amp to the Alpine system in my 21. I want to keep the ANC if possible. Also don't want to mess with the back of the 12". Could really use some help on what's all involved.
 
I want to add the JL Stealthbox and amp to the Alpine system in my 21. I want to keep the ANC if possible. Also don't want to mess with the back of the 12". Could really use some help on what's all involved.
APSUB-CH41 is plug and play to add subs/amp. Does require you to pull the screen out but don't have to cut anything. Otherwise you will need a line out converter and have to hack the factory wiring to get a signal.
 
APSUB-CH41 is plug and play to add subs/amp. Does require you to pull the screen out but don't have to cut anything. Otherwise you will need a line out converter and have to hack the factory wiring to get a signal.
Ok Thanks. I'll probably go this route. Hopefully not to big a deal to pull the screen out.
 
Ok Thanks. I'll probably go this route. Hopefully not to big a deal to pull the screen out.
I believe its 2 screws on top of the dash and then just clips around the edges. If you dont already have some I'd recommend getting some trim removal tools as they come in handy when running wire as well.
 
Ok Thanks. I'll probably go this route. Hopefully not to big a deal to pull the screen out.
Watch the videos on infotainment.com's website. They show how to remove all of the uconnect screens.
 

Users who are viewing this thread

Back
Top