Vent Visors (Window Visors)

[EJanx07]

Thanks for the reply man (or wo-man), I was specifically asking about the mopar ones though, but I appreciate it nonetheless

While I got you here, did you (or do you) have any issues with the power folding regular mirrors hitting the vent visors when folded?

I don’t have power folding mirrors, so I’m not sure...

 

[wildh24]

What are benefits of these? I've no experience so I'm genuinely curious.

 

[wahudiditagain]

Some non-acetone finger nil polish remover will take that "EGR" print off without damaging the plastic.

 

[1stTimeRAM]

What are benefits of these? I've no experience so I'm genuinely curious.

There are a couple of benefits to them....one is that you can crack the windows when it's raining and not get water inside the truck. They also offer a little extended sun visor on the side windows. The biggest one for me is that when I park my truck in the parking lot at work (or wherever) in the hot summer time, I can vent the windows and keep it from getting quite as hot inside the truck.

 

[soedog]

Here is my thread on the Mopar Window Deflectors.
https://5thgenrams.com/community/threads/mopar-window-deflector-install.6156/

 

[soedog]

Does anyone know if the mopar bug shield for the hood and windows if they have any logos on them?? Thanks

Window Deflectors have the Ram logo.

 

[kingkasc]

Window Deflectors have the Ram logo.View attachment 15678

OMG! Thank you!! I almost went with a diff brand because I couldn't find the answer to this! What about the hood deflector.. does that also have the marking? Thanks mayne

 

[soedog]

OMG! Thank you!! I almost went with a diff brand because I couldn't find the answer to this! What about the hood deflector.. does that also have the marking? Thanks mayne

Sorry I don’t have the hood deflector so I can’t answer that one.

 

[Rick8325]

I’m trying to find a set of matte black in-channel crew cab visors and it seems only a couple of companies make that color right now. I was checking out Wade and their pictures of their product look a little funky/ugly. Shouldn’t the visor be wedged into the pillar and not under the rubber? https://wadeauto.com/products/2019-dodge-ram-in-channel-wind-deflectors?rq=mk_dodge~yr_2019~md_ram

 

[JJWerline]

I got the In-channel EGR (P/N 572951) ones this go around. Should have them in the next week or so.

Ordered from https://www.svcustoms.com/ as it was the best price I found after searching around a little.

Is that model number for Crew Cab?

 

[cjgerson]

Is that model number for Crew Cab?

Yep sure is!

 

[41magmag41]

Anyone know if there is a visor for the bed rear window and who makes it?

 

[41magmag41]

Does Mopar make vent visors for the new ram yet?

Yes

 

[silverbullet]

Just removed the AVS in-channel low profile vent visors. Left my windows up for the recommended 72 hours. They were not noisy which was my biggest concern. I could tell at hwy speeds they were on there but I'm ate up so I doubt most would notice at all, really minimal IMO. They looked pretty good with the exception of the rear window on one side was bowed in a bit, very streamlined which was cool. Mirrors did not touch or anything like that. They did push out on the window seals in the corners which would likely lead to some problem eventually. First time I lowered the window and raised it the window hit and 'auto-opened' b/c of the obstruction. Tried again and the window went right up, no problem. Did the same with the passenger side and the window hit the edge and broke off a piece of the AVS visor; first try.

Best case I would have been pushing the visor out so the window would not hit....that would suck for the driver side and be impossible for the passenger side.
Now I tried to return these to Amazon when I bought them out of fear of wind noise; UPS never showed (it's their thing on Amazon pick ups), Amazon eventually just refunded me and let me keep them so no loss to me and I actually had some free time this past weekend so I thought I'd give them a shot.

I personally won't be giving AVS a shot in the future.

 

[silverbullet]

I’m trying to find a set of matte black in-channel crew cab visors and it seems only a couple of companies make that color right now. I was checking out Wade and their pictures of their product look a little funky/ugly. Shouldn’t the visor be wedged into the pillar and not under the rubber? https://wadeauto.com/products/2019-dodge-ram-in-channel-wind-deflectors?rq=mk_dodge~yr_2019~md_ram

The AVS I just removed also went under the rubber seal by design. It realy bowed the seal out on mine and was a bit of an eye soar. Seems like bad design and that edge needs to be thinner or have a slower taper on that rubber seal edge.

 

[Siege1979]

I bought the AVS in channel, Installed them and was very pleased..... then the next morning both rear window deflectors where bowed in and touching the windows, if i rolled the window down they bowed further requiring me to push the center outward to roll the window up. I then rolled up some micro-fiber towels and wedged them in between the deflectors and the windows and they took the original shape back.... 12 hours later bowed inward, customer support believes the installation of some additional clips should resolve the problem so I am awaiting receipt of those. If the clips do not resolve the issue I will be returning them, I have a 2000 silverado with weathertech deflectors on it since 2 weeks old and not a single problem with them in nearly 19 years as well as 3 other previous vehicles all weathertech no issues, I only bough AVS because weathertech is not selling them for the DT yet.

 

[Aries Ram]

Thank you. Unfortunately, they do not ship to Alaska. Quite common with Ebay sellers.

I have this same set that I will sell you but I'll have to check on shipping. Ig interested, send me your address.