Tow Mirror Covers

jstew

Active Member
Messages
123
Reaction score
49
Points
28
Anyone know how to replace the manual folding, chrome tow mirror covers/caps and replace with the black ones? This is the final chrome piece I need blacked out for my Laramie Sport!
 

Livinfast85

5thGenRams Supporter
Site Supporter
Messages
213
Reaction score
244
Points
43
Location
Pearland Texas
There is a pretty comprehensive thread here already about mirror covers, but here are a coupe of attachments that might help .
Read the tread at
side mirror removal to replace mirror cap
The problem with these documents is that they aren't for the Tow mirrors which have a completely different style cover.
 

myram2019

Well-Known Member
Messages
208
Reaction score
164
Points
43
Either way use a suction cup to remove the mirror. This has been the most successful way of not breaking a mirror. I did it and had great success. Once you get the mirror off you can see what is holding on the cap. Good luck
 

RBRK

Well-Known Member
Messages
333
Reaction score
219
Points
43
Location
Salt Lake City, UT
You can't change just the cover on the tow mirrors. I bought black mirrors and swapped the wiring and actuators from my chrome so they had blindspot, heat and memory, since you cannot get all of those options in a black tow mirror. What trim do you have and mirror options now?
 
Messages
21
Reaction score
7
Points
3
I am in the same position you are. I have a 19 Laramie with the Chrome tow mirrors. Currently doing my digging, so please do keep me updated.

I did read somewhere on the forums that the older tow mirrors have black covers available on ebay that slide over the tow mirrors with the light holes on the top corner. However when you flip the mirror vertical, you will see the chrome again. I might end up going this route if we cant find another solution. I would rather not though.
 

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

Top