5thGenRams Forums
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Tire size
- Thread starter Jonehox
- Start date
1BADRAMLIMITED
Spends too much time on here
im showing that to be almost a 34" tire. as far as width you are fine but the height may cause rubbing if your not on a level or ORG
275/60/20 fits without any modifications on a non-leveled / no-ORP(1" factory lift).
You MIGHT be able to get away with 275/65/20 with noted inner fender modifications that are posted.
From posted responses, it seems like they will fit and drive fine. But you will have rubbing in full lock or maxed suspension movements.
But I've also noticed that people with levels (1-2") and lifts still have rubbing with 34 and 35s and still require slight modifications to the inner fender.
I think once you go passed 33", slight inner fender modifications are typically needed. Wheel size and offset will also effect this!
You MIGHT be able to get away with 275/65/20 with noted inner fender modifications that are posted.
From posted responses, it seems like they will fit and drive fine. But you will have rubbing in full lock or maxed suspension movements.
But I've also noticed that people with levels (1-2") and lifts still have rubbing with 34 and 35s and still require slight modifications to the inner fender.
I think once you go passed 33", slight inner fender modifications are typically needed. Wheel size and offset will also effect this!
CHeYeNNe71
Ram Guru
For reference, you can run the 285/55R22 dimension stock with the help of a heat gun in a few spots.
Thanks for this. Just added this to mine. went with MT Baja Boss 285/55R22. Got a thump-thump sound at full lock. I will try the heat gun. Love the ride
