Side step / nerf bar recommendations

[RedSox10NG]

Nfab Epyx from Real Truck

 

[ClinchMountainRam]

The N-Fab Epyx are some of my favorites looks-wise. I've also been thinking about the Predator Pro since they are aluminum. I've got a few more weeks to decide before my truck gets here.

 

[theblet]

Mine extend to the bed. Not sure the brand it was on there when I bought it.

 

[My_first_RAM]

Go Rhino RB20. Love the look and they eliminate the gap between the cab. They stick out quite a bit so you need wider wheels and tires. I’m running 20x12 with a -51 offset.

 

[brian42]

Here's a website to view some options:

Truck, Jeep & SUV Steps and Running Boards | RealTruck

Climb in and out of your truck easier with a pair of RealTruck® Running Boards. Choose from standard or retractable, frame or body mount, and more.

runningboardwarehouse.com

I got my last set their for my last truck (Raptor ovals for my F-250) and loved them. Solid, sturdy, and stood up to a lot of desert trails.

Everybody has their personal preferences so I'll only provide a couple of observations:

1. My F-250 was taller than my 1500 and my wife was fine with the nerf/ovals I had on that truck (she's 5'4").

2. My dad has had AMP power boards for years (at least 5) and after a few adjustments after initial installation (and occasional lubrication) they are still working fine today.

3. I had always wanted a set of n-Fab bars. After I finally got them I learned that I really don't like stirrups. You had to look to make sure you were stepping on them and when it was wet my foot would slip off of them regularly (my shoe size is 13). My wife and kids slipped off of them once in the rain getting into the truck and the look my wife gave me told me everything I needed to know.

Tons of styles, models, and manufacturers to suit every need so you be able to find what you're looking for. Good luck!

 

[NYKBOB]

Since my truck had a fair amount of chrome on it, I wanted a chrome look. I did not like the straight look and I did not like the round curve that goes under the truck. I went with these as they are oval, strong and have large foot pads. I'm happy with the look.

Amazon.com: TAC Side Steps Running Boards Fit 2019-2021 RAM 1500 Crew Cab (Exclude 2019-2021 RAM 1500 Classic) Truck Pickup 5" Oval Bend Stainless Steel Side Bars Step Rails Nerf Bars 2Pcs: Automotive

Buy TAC Side Steps Running Boards Fit 2019-2021 RAM 1500 Crew Cab (Exclude 2019-2021 RAM 1500 Classic) Truck Pickup 5" Oval Bend Stainless Steel Side Bars Step Rails Nerf Bars 2Pcs: Automotive - Amazon.com ✓ FREE DELIVERY possible on eligible purchases

www.amazon.com

 

[JimDbytheSea]

I did the Rough Country 5 inche nerf bars on mine after getting a 4 inch BDS lift.

 

[NGEN]

I have a set of the Mopar black ones if anyone is interested. In the Dallas area and they are perfect condition.

Pictures?

 

[My_first_RAM]

Pictures?

They are sold. Apologies. Sold them earlier this week.

 

[ClinchMountainRam]

I ordered the N-Fab Predator Pro yesterday. I may actually like the Epyx looks a little better, but went with Predator Pro because they're all aluminum. I'll have a better feel when I get them installed. Right now it's a race to see which arrives first, the truck or the bars.

Sent from my SM-G973U using Tapatalk

 

[Jabberjaw]

Havoc HS2. Wife likes them (she’s short), they look good and they have capped ends so they’re less likely to rust out from the inside.

 

[McHouck]

I installed a set of the Go Rhino D6 boards. They aren't aluminum so I had them bed lined prior to installation. Very solid and I highly recommend. View attachment 86978

Got anymore pics of the running boards/truck? Im ordering a billett silver, night edition too.

Sent from my SM-N950U using Tapatalk

 

[cdpoole]

Has anyone installed the NFAB podium steps?

 

[CPenn1086]

Got anymore pics of the running boards/truck? Im ordering a billett silver, night edition too.

Sent from my SM-N950U using Tapatalk

Here ya go...

 

[McHouck]

Can anyone explain why the rhino's are 7.5" in front and 6.5" in the rear?

Sent from my SM-N950U using Tapatalk

 

[Dragonmaster13]

Can anyone explain why the rhino's are 7.5" in front and 6.5" in the rear?

Sent from my SM-N950U using Tapatalk

They should be the other way around, 6.5" front 7.5" rear. It's an offroad thing, with the wider part in the back, if you do hit an obstruction the boards are supposed to kick your truck away to avoid body damage as you pass.

 

[My_first_RAM]

Can anyone explain why the rhino's are 7.5" in front and 6.5" in the rear?

Sent from my SM-N950U using Tapatalk

I think it’s because they are modeled after the Raptor ones. The front fenders are wider that the rear of the cab. Additionally, as the wheels turn they sling mud and such in a wider spray. Extended protection.

 

[YELOSUB]

Just installed the Go Rhino RB20 running boards on my 21 Billet Silver Night Edition on factory 20” rims...While they do stick a bit from the side I actually like that as I feel it provides extra protection for the parking lot idiots...Install was simple and straight forward...

 

[McHouck]

Which coating did you go with? Powder coat or line-x?

Sent from my SM-N950U using Tapatalk

 

[YELOSUB]

Which coating did you go with? Powder coat or line-x?

Sent from my SM-N950U using Tapatalk

Sorry I’m just seeing this...I went the powder coat route...They have somewhat of a rough texture which I really like and are not slippery at all...