5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

SGW 2025 Ram 1500 Big Horn

Mission was a success boys. 25 DT 35 inch tires changed tire size using a 21 WL model in Alfa and Autel scantool to unlock SGW. Afterwards I performed the proxy alignment and all is good! Did have to reset the bcm to get configuration mismatch codes to go away.
 
Last edited:
Mission was a success boys. 25 DT 35 inch tires changed tire size using a 21 WL model in Alfa and Autel scantool to unlock SGW. Afterwards I performed the proxy alignment and all is good! Did have to reset the bcm to get configuration mismatch codes to go away.
Oh, good. And that proxi was with witech? So regular guys should be able to at least make the changes with alfaobd and autoauth, then take it to a dealer for a proxi alignment afterwards?
 
Oh, good. And that proxi was with witech? So regular guys should be able to at least make the changes with alfaobd and autoauth, then take it to a dealer for a proxi alignment afterwards?
As far as I can tell. I used my autoauth on a MK900-BTt autel scan tool and alfa obd with obd link MX adapter. Unlocked gateway using autel then with obdlink pod hooked up to splitter made the dynamic tire size change from 2480 to 2700. Truck was pissed off. Hooked up MDP using dealer witech subscription and was able to performed proxy alignment of all modules. The PCM was showing not aligned but I reset the BCM and all was good. Also ABS initialization obviously.
 

Users who are viewing this thread

Back
Top