Rough Country Grille Lights and Bumper Light

[CharlieP]

I was wondering if anyone has done the install on either one of these Rough Country Kits. My local dealer wants $1,650 for both. just seems a little steep and wondering if it was worth it>

 

[PorBoy]

I’ve done the grill lights, but have stayed away from the bumper install. Is that cost including all needed parts ?

 

[CharlieP]

I’ve done the grill lights, but have stayed away from the bumper install. Is that cost including all needed parts ?

yes that is the cost for install and parts. Parts are 400 and 1250 for labor

 

[diamondmi]

I was wondering if anyone has done the install on either one of these Rough Country Kits. My local dealer wants $1,650 for both. just seems a little steep and wondering if it was worth it>

Curious, what are these lights? Never heard of Rough Country grill and bumper lights.


Sent from my iPhone using Tapatalk
Waiting for my newly ordered 2020 Laramie Longhorn, Delmonico Red, chrome bumpers, 20” wheels, 5.7 V8 Hemi MDS VVT eTorque, 3.92 rear, all options except diesel, multifunction tailgate, protection group and trailer tow group. Interior Black/New Saddle. Looking forward to delivery. Truck going through final inspection.

 

[ej23]

I have been looking at both.
According to the install sheet on the grille lights 5-6 hours for the 6" Grille lights https://s3.amazonaws.com/roughcountry/install/921707820.pdf

and 3-4 hours per the install on the bumper light.

https://s3.amazonaws.com/roughcountry/install/921707780.pdf

I'm thinking about going for it, just feel like i need to come up with a good solution for light switches as I will be adding more ditch lights and some on the Ridgelander rack and bed as well over time.

 

[HitmanHugh]

That's a lot of money but the light setup looks awesome!

 

[PorBoy]

The grill lights will take about three hours including the time needed to finesse them. I run a Bluetooth option with mine as opposed to the harness that Rough Country supply’s.

 

[ej23]

No to steal the thread, but what Blue tooth did you go with @PorBoy ?

 

[VanLith10]

I have the bumper light from RC. $1200 is outrageous to have it installed. I had mine installed for $400 ($100/hr). It looks amazing and hidden great. With that said, the RC light itself could be better. I can get pics if you want

 

[HitmanHugh]

I have the bumper light from RC. $1200 is outrageous to have it installed. I had mine installed for $400 ($100/hr). It looks amazing and hidden great. With that said, the RC light itself could be better. I can get pics if you want

In what way could the light be better, just curious and pics are always appreciated

 

[PorBoy]

No to steal the thread, but what Blue tooth did you go with @PorBoy ?

This is what I used.

XKGLOW LED Taillights, Headlights, Underglow & More | XKGLOW

Explore XKGLOW's lighting for cars, trucks, motorcycles, marine vessels and more. Our products are smartphone compatible with amazing effects and customizations

www.xkglow.com

 

[diamondmi]

I have been looking at both.
According to the install sheet on the grille lights 5-6 hours for the 6" Grille lights https://s3.amazonaws.com/roughcountry/install/921707820.pdf

and 3-4 hours per the install on the bumper light.

https://s3.amazonaws.com/roughcountry/install/921707780.pdf

I'm thinking about going for it, just feel like i need to come up with a good solution for light switches as I will be adding more ditch lights and some on the Ridgelander rack and bed as well over time.

They sure look nice. However, when I get my Laramie Longhorn I’ll have a different grill without those rectangle cutouts.


Sent from my iPhone using Tapatalk
Waiting for my newly ordered 2020 Laramie Longhorn, Delmonico Red, chrome bumpers, 20” wheels, 5.7 V8 Hemi MDS VVT eTorque, 3.92 rear, all options except diesel, multifunction tailgate, protection group and trailer tow group. Interior Black/New Saddle. Looking forward to delivery. Truck going through final inspection.

 

[VanLith10]

In what way could the light be better, just curious and pics are always appreciated

So this is my first truck and first light bar on a vehicle. I just feel you might get what you pay for, and this light bar is on the cheaper side compared to say Rigid lights. My high beams shoot out further than this light bar. This light bar is good, in my case, for lighting up more of the sides of the road. I will see if I can go out tonight and take some pictures with the light bar on compared with my low beams and high beams.

 

[CharlieP]

I’ve done the grill lights, but have stayed away from the bumper install. Is that cost including all needed parts ?

where did you run the wire through the firewall to get into the cab?

 

[Kratz87]

They sure look nice. However, when I get my Laramie Longhorn I’ll have a different grill without those rectangle cutouts.


Sent from my iPhone using Tapatalk
Waiting for my newly ordered 2020 Laramie Longhorn, Delmonico Red, chrome bumpers, 20” wheels, 5.7 V8 Hemi MDS VVT eTorque, 3.92 rear, all options except diesel, multifunction tailgate, protection group and trailer tow group. Interior Black/New Saddle. Looking forward to delivery. Truck going through final inspection.

I have the 2020 Limited 1500 and ran into the same grill issue as the Lamartine Longhorn. I have sent queries to Rough Country to see what the issue truly is with no reply yet. It seems that it is not a size or dimension problem for the upper grill - just the fins within the openings left and right of the RAM that need to be cut out. I am trying to confirm. If that is all it is, I am doing both! For lower number light, the only thing needed is to order the MOPAR two-piece grill so the light will shine through! Anyone try this yet?

 

[deanfx]

Following