1jmicheletti
Member
- Joined
- Feb 6, 2019
- Messages
- 9
- Reaction score
- 5
Why does the drivers side rear end un level by 2 inches?
5thGenRams Forums
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
REBEL DRIVERS SIDE REAR TRUCK BED DROOP
- Thread starter 1jmicheletti
- Start date
Redz72
Ram Guru
A whole 2” would mean something is seriously wrong. But if it’s just a slight lean, it’s due to a full tank of fuel. Check to make sure the ground is level 100%.
TheWaterman83
Well-Known Member
- Joined
- Dec 31, 2021
- Messages
- 381
- Reaction score
- 348
This was my first guess. If it's an air suspension truck, especially with some miles on it, a corner might be done/ruptured.
Ramgoose
Active Member
- Joined
- Feb 6, 2019
- Messages
- 108
- Reaction score
- 103
Two inches is quite a bit. My 2019 Rebel has always been lower on the left side by about 1/2 “ front and rear. Doesn’t bother me anymore I just accepted that engineers placed the fuel tank, main 90 pound amg battery, suit case battery if you have etourque all on the left side. If it’s a Rebel you also have a hefty fuel tank skid plate. I’ve read that this was supposed to be compensated by different left and right side rear coil springs but ???
