Going to be adding some rear spacers on the truck. Have the ORG, and putting on 1.5" spacers. All the shocks I can find say they are only for 0-1" lift on the rear of an ORG truck. What is everyone running for rear shocks if going over 1"?
5thGenRams Forums
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
rear lift shocks
- Thread starter HSKR R/T
- Start date
Saddlerocker
Active Member
- Joined
- Nov 5, 2021
- Messages
- 184
- Reaction score
- 70
- Points
- 28
- Age
- 39
The rear Bilstein 5100's say 0-2". (Part 233354)
I have a set and the B12 springs, but dont think I am going to use them. Not sure yet.
Edit: I see that its 0-1" for ORG.
I have a set and the B12 springs, but dont think I am going to use them. Not sure yet.
Edit: I see that its 0-1" for ORG.
Bikstiens only show for 0-2" on non-ORP trucks and 0-1" on ORP. Same thing with Foxz unless you go to the $1000+ performance elite series.
Biltsein has 5100 shocks for all the way to 8” lift, so they have them, you’ll just have to do some legwork to find them. I’ve stumbled across ones that state they fit 3 and 4” lifts, but cant remember the part number.
Rough Country has the 0-3” and 3.5” n3 shocks.
You have to keep in mind when you search places online (even manufacturer’s sites) that the info might not be correct and you have to contact them to get the correct fitment info. That issue has happened to me several times.
