Ram Box silver cargo rails

[RamBum]

Can you tell me if I need to order new bolts, or can I use the ones from the old rails?

 

[Ready Go]

Just purchased a limited longhorn with ram box. Is there a cover that fills the gaps between the tailgate and the ram box? Seems odd that the stock cover doesn’t go over that gap.

Even the Mopar Roll-Up Tonneau Coverhas that gap on RamBox/MFT trucks!

I used 1/4" thick by 1.5" wide heavy density stick-on foam that came on a roll.

I cut pieces to fit the length and stacked 4 pieces to get the ~1" needed to fill the gap.

It's held up for almost 2 years now and it keeps water out very well..at least at those corners..some water gets past the cover-to-MFT top though, as the seal strip isn't a tight fit..and I used the higher pressure Touchless Wash at the car wash.

 

[disarm]

Can you tell me if I need to order new bolts, or can I use the ones from the old rails?

I used the same bolts

 

[RamBum]

Great, thanks

 

[RamBum]

Well, so far I've managed to find the left hand rail, but not the right hand one, PN 68027048AE. I have looked everywhere. A couple of places online said they had it in stock, but then when I ordered one I'd get an email back saying that it was on backorder status. I tried every dealer I could think of, but it's the same story. Does anybody have any ideas on where to find one of these? If not, who would be the most reliable vendor to use to get one on backorder? Any help would be appreciated!

 

[oe542bob]

Try having your local dealer run a national search for in stock parts. If there are any available, they should be able to see that. They might order it directly and have it shipped to them or possibly direct to you. Or they may just say, here is where they are shown as stock items. You should get the dealership name(s) that show on hand stock. It will be up to you to call the parts department and see if you can purchase the rail. Always ask them to “put a hand on it” to guarantee they actually have it. Pay the price & shipping—done. You also may find a dealer with the part you need, but sometimes they won’t just sell it unless you are a direct customer.
When I went through this, I got lucky as I found a coworker that wanted a cover. So I sold mine to him (cheap) but told him I needed the silver rails because he would need the black rails to work with the factory cover.

 

[RamBum]

That's how I found the left hand side rail! I found a dealer in Iowa and got it from them. I called again today, and they told me that here is something like 200 of these on backorder nationwide, and no dealer is showing one in stock.

 

[oe542bob]

That's how I found the left hand side rail! I found a dealer in Iowa and got it from them. I called again today, and they told me that here is something like 200 of these on backorder nationwide, and no dealer is showing one in stock.

Well, damn, that sucks. How about from a junkyard source such as CoPart? I’m not sure if that name is accurate, and maybe someone can chime in with some sources.