Welcome. Are you talking about the parts needed to use the divider as a bed extender? My dealer told me that they stopped including them on 2019 and up. You can still install them yourself. Look at this thread.Ram Box divider/extender handle and pin. Just bought a 2021 Laramie with ram Box and dealer claims it doesn't come with the handle and pin ?
The ability to use the Truck Bed Cargo Divider that comes in the Bed Utility Group, as a bed extender, does not exist for the DT Platform RAM 1500. The Truck Bed Cargo Divider can only be used to separate parts of the bed on the DT Platform.Ram Box divider/extender handle and pin. Just bought a 2021 Laramie with ram Box and dealer claims it doesn't come with the handle and pin ?
That first part is incorrect, per the thread @Morenar shared above. I’m one of the MANY members who own a DT with RamBoxes and the BUG, received the divider/extender (but not the pegs/releases), and either had our dealers supply the missing parts (as I did) or purchased them ourselves. So it absolutely “exists”, but FCA quietly discontinued supplying those parts (presumably due to taillight visibility regulations) after production started on the DTs. Back in 2018, I showed my dealer several brochures depicting those parts on a DT from my time of order; FCA edited those documents later to hide or remove them. But the holes are there and threaded.The ability to use the Truck Bed Cargo Divider that comes in the Bed Utility Group, as a bed extender, does not exist for the DT Platform RAM 1500. The Truck Bed Cargo Divider can only be used to separate parts of the bed on the DT Platform.
On the DS Platform RAM 1500 Classic, the RamBox Cargo Management System comes with the Truck Bed Cargo Divider/Extender; the Handle/Swivel Release 68054996AA; the Grommit/Pivot Joint 68054997AB; and the Left Rear Box Side End Rail 68044935AC. You are able to use the Truck Bed Cargo Divider/Extender, as a bed extender, on the DS Platform RAM 1500.
Hope this helps you. Your dealer is correct.
I am having the same issue, how the hell are you suppose to connect it and where can you get the pins to fasten it...Ram Box divider/extender handle and pin. Just bought a 2021 Laramie with ram Box and dealer claims it doesn't come with the handle and pin ?
Where can I buy the lockThat first part is incorrect, per the thread @Morenar shared above. I’m one of the MANY members who own a DT with RamBoxes and the BUG, received the divider/extender (but not the pegs/releases), and either had our dealers supply the missing parts (as I did) or purchased them ourselves. So it absolutely “exists”, but FCA quietly discontinued supplying those parts (presumably due to taillight visibility regulations) after production started on the DTs. Back in 2018, I showed my dealer several brochures depicting those parts on a DT from my time of order; FCA edited those documents later to hide or remove them. But the holes are there and threaded.
Go to the thread I mentioned in my previous response and find post #10 for part numbers.Where can I buy the lock
These worked for me.... https://smile.amazon.com/dp/B095SC6...abc_9TKFT8P2YQSJAT5J4NAA?_encoding=UTF8&psc=1Same situation here. My dealer said after due to a lawsuit they do not include the fasteners for any models after 2019. Currently looking for what Bezos has to offer...