What's new
By:
5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Quality of aftermarket running boards VS Mopar

Zacritz929

Zacritz929

Active Member
Joined
Feb 5, 2019
Messages
39
Reaction score
3
Points
8
Age
35
When I got my ram in 2019 I bought cheap eBay running boards that are pretty rusty already(salty winters here in NW Ohio).

I'm not sure if I want to go with Mopar or an aftermarket brand such as rough country. Can anyone chime in with what they'd recommend would stay in better condition for longer?
 
Tons of choices and reviews on Running Board Warehouse …. In most cases you get what you pay for …. In the case of my 2012, I ponied up for what I thought was a good set of powdercoated N-Fabs …. NE Ohio winters are those things for breakfast in 3 years …. Sure, N-Fab will warranty them, but you have to pay to send em back …. And why, to go thru the same sh!t 3 years later …. I replaced em with Mopar factory steps …. 5 winters later, no rust at all


Sent from my iPhone using Tapatalk
 
BowersFJ said:
Tons of choices and reviews on Running Board Warehouse …. In most cases you get what you pay for …. In the case of my 2012, I ponied up for what I thought was a good set of powdercoated N-Fabs …. NE Ohio winters are those things for breakfast in 3 years …. Sure, N-Fab will warranty them, but you have to pay to send em back …. And why, to go thru the same sh!t 3 years later …. I replaced em with Mopar factory steps …. 5 winters later, no rust at all


Sent from my iPhone using Tapatalk
Click to expand...
Ok, that is exactly what I'm curious about. I'm leaning towards Mopar.
 
As said, you get what you pay for. Most brands have lower end boards and bars and then there are the higher priced ones. I think the main difference is the coating and that the higher end ones are Stainless steel under that coating.
 
Just to throw my 2 cents here, I have the mopar matte black steps..4 years later and these have 0 rust anywhere on them. Look completely new to this day. On side note, my dad has a 2017 ram and bought one of those $200 chrome steps. His rusted a year later, especially on the mount area underneath the car. So really, if you can't afford the mopar oem, give it some time and keep saving up. I think its def. worth it in the long run.
 
I have the Mopar stainless, still look new after two years
 
JP_Night18 said:
Just to throw my 2 cents here, I have the mopar matte black steps..4 years later and these have 0 rust anywhere on them. Look completely new to this day. On side note, my dad has a 2017 ram and bought one of those $200 chrome steps. His rusted a year later, especially on the mount area underneath the car. So really, if you can't afford the mopar oem, give it some time and keep saving up. I think its def. worth it in the long run.
Click to expand...
If I go Mopar the matte black is what I'm looking to get. Thanks for the input
 
I personally do not, I just like the design and am torn between the two choices I posted. The price point is the main reason. If I change what I have now (standard RAM factory steps), and go with static, that is what I would buy. I like that there isn't any gap between the step and the body, and the overall looks. They are steel construction with powder coat, so should be pretty rugged. The factory RAM steps I have are nice and I do like them, however, I like the RC's better, and the price is pretty attractive in comparison to the Retract, although I like the Retract the best and the way they look when stowed. I know at least of at least 1 person on here that has them on his truck.
 
BowersFJ said:
Tons of choices and reviews on Running Board Warehouse …. In most cases you get what you pay for …. In the case of my 2012, I ponied up for what I thought was a good set of powdercoated N-Fabs …. NE Ohio winters are those things for breakfast in 3 years …. Sure, N-Fab will warranty them, but you have to pay to send em back …. And why, to go thru the same sh!t 3 years later …. I replaced em with Mopar factory steps …. 5 winters later, no rust at all


Sent from my iPhone using Tapatalk
Click to expand...
Yeah my n fabs had ugly surface rust after just a few months. Wouldn’t buy again
 
I have a set of Romik boards and so far they look as good as the day they were installed. Only 6 months in, but so far so good.
 
FWIW, the Mopar ones are made by someone else and just sold under the Mopar name. Not sure what company makes them, but chances are you could buy the brand the company sells cheaper than the Mopar ones and get exact same running board/steps
 
NFabs I like....have held up for a couple years already but I am getting them LineX'd in the spring to make sure they last.
 
I've owned many different brands of aftermarket steps, as well as three sets of Mopar steps. None of the aftermarket steps made it through the first winter without showing at least some surface rust. This was a mix of chrome plated and black painted steel steps. All the Mopar steps I've owned (one fixed and two powered) lasted the entire time I owned those trucks, without showing any surface rust. That probably has more to do with what they're made of, but from my experience I will always go with OEM steps from now on.
 
Have a set of GoRhino Dominator D6 matte steps and 2 PA winters in, no issues at all.

I will say I spray some matte protectant on them every wash and fluid film the bolts holding them on. That helps keep the rust at bay.
 
I bought the Go Rhino RB20 running boards. There are 2 coating to choose from, standard black matte powder coat then there's the bed liner option which I got. Very durable heavy duty bed liner material. Not as hard as linex but not quite as soft as a rhino liner material. Kinda in between. They are a little spendy but they are heavy and well made. 3 years and 0 issues. They are a Raptor style board.
 
You must log in or register to reply here.

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)

Site Vendors

https://www.jasonlewisautomotive.com/

Members online

Total: 1,070 (members: 7, guests: 1,063)
Back
Top