I am almost finished with the 33 gallon tank sliders. What should I build next???? Front bumper, rear bumper or bed rack fro roof top tent........
5thGenRams Forums
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Poll, What to build next!!!
- Thread starter Shifts And Grins Fab
- Start date
Mustangmike66
Well-Known Member
- Joined
- May 24, 2019
- Messages
- 313
- Reaction score
- 559
- Points
- 93
- Age
- 49
Either bumper, dealers choice.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Trooper4
Ram Guru
- Joined
- Feb 14, 2019
- Messages
- 1,782
- Reaction score
- 2,040
- Points
- 113
- Age
- 76
- Location
- KITTITAS, Washington
Nice fab job.
Thank you
ElevatedOverlandDFW
Member
- Joined
- Dec 30, 2020
- Messages
- 21
- Reaction score
- 20
- Points
- 3
- Age
- 47
I've got a 2021 I would drive out to you if you'd be interested in making a set of sliders for my Rebel. I also have the 33gal tank.
I'll double check but these should work on yours as well. I will build a jig to make reproduction much faster and easier.
saylor
Well-Known Member
- Joined
- Jan 5, 2021
- Messages
- 308
- Reaction score
- 232
- Points
- 43
- Age
- 54
boss i picked bed rack for rooftop tent, but we need some kind of roof rack. even if its floating and tied to a headache bar or something.
no one has roof racks for these trucks yet.
you can corner the market.
no one has roof racks for these trucks yet.
you can corner the market.
ElevatedOverlandDFW
Member
- Joined
- Dec 30, 2020
- Messages
- 21
- Reaction score
- 20
- Points
- 3
- Age
- 47
checking in to see if you're ready for me to make a visit?
AmericanRebelution
Well-Known Member
I voted for "something else". How about a skid plate for the front portion of the truck?
LaxDfns15
Ram Guru
I voted for front bumper, but I'd buy a skid plate in a heartbeat. SOMETHING to cover the front end of the truck from the bumper to the diff skid plate.
I'm working out a few things to try to make install of the driver's side as easy as possible without sacrificing strength
something I am looking into as well.
That is a popular request. The factory setup is lacking there for sure
I agree that is a need for sure. It's nice I have the truck to prototype stuff on too.
saylor
Well-Known Member
- Joined
- Jan 5, 2021
- Messages
- 308
- Reaction score
- 232
- Points
- 43
- Age
- 54
how much money do i send you lool I want a prototype! 
i figure a properly mounted headache rack would support a box frame or something. maybe some gussets carefully placed.
screen in the top and the rear window (or bars)
and its a headache rack / lightbar / topper / roofrack
let me know if you make one - make two! im in!
i figure a properly mounted headache rack would support a box frame or something. maybe some gussets carefully placed.
screen in the top and the rear window (or bars)
and its a headache rack / lightbar / topper / roofrack
let me know if you make one - make two! im in!
ElevatedOverlandDFW
Member
- Joined
- Dec 30, 2020
- Messages
- 21
- Reaction score
- 20
- Points
- 3
- Age
- 47
Okay cool. I had to order something as my wife literally almost fell out of the truck the other day, so I ordered the Go Rhino D6 with drop steps, but I am so down to have you do a set of slider/steps, so keep me posted. I will dm you my cell, so you can save my contact and text me when you're ready to move forward. I am not on here every day, so text is best way to get ahold of me.
Replied to DM
Something like that should work just fine. With the right materials and gussets it would be very strong toohow much money do i send you lool I want a prototype!
i figure a properly mounted headache rack would support a box frame or something. maybe some gussets carefully placed.
View attachment 81477
screen in the top and the rear window (or bars)
and its a headache rack / lightbar / topper / roofrack
let me know if you make one - make two! im in!
Nothing in the works yet but that bottom one would be a pretty easy build. I still have a few Toyota orders I'm filling and should get much more time to get stuff knocked out. I priced my Toyota stuff I was making stupid high and was still getting orders so I just cut it off. I am devoted to switching to Rams. It will take me a little bit of time since everything is a prototype first and then I will build jigs to make it repeatable. Once I get the ball rolling on a few things, I will start adding more items to the list. I like this light bar idea, the roof rack and the skids plate ideas as well. Keep them coming!
