Not for the third Gen ecodiesels unfortunately.
5thGenRams Forums
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Oil Filter for Ecodiesel ?
- Thread starter Croaker
- Start date
Croaker
Active Member
The plastic on the filters without the Mopar logo seems thinner.
…but I guess the extra thickness is not needed if it is not being re-used?
…but I guess the extra thickness is not needed if it is not being re-used?
Croaker
Active Member
Supply and demand.
FYI I just compared the bypass valve spring tension using the FingerMeter™ and the OEM Mopar one is much stiffer then the aftermarket filter...... YMMV.
I will be sticking to the Factory Filters with the correct logo.
(You can take the filter apart by gently prying up on it from the cup edge with a bigger flathead, though I wouldnt do it with a filter I am going to use in the truck later....)
I will be sticking to the Factory Filters with the correct logo.
(You can take the filter apart by gently prying up on it from the cup edge with a bigger flathead, though I wouldnt do it with a filter I am going to use in the truck later....)
Users who are viewing this thread
Site Vendors
