New 2020 Ram getting 2” Mopar Lift

[Alex5737]

So factory off road package and 2 inch Mopar lift? Any idea how much rake you have? I have the Mopar lift sitting in my garage but can't decide if I want to use the 2 inch rear spacers or replace them with a 1 inch spacer to get closer to level.

I'm at 39 in the front and 40.5 in the rear. Ground to wheel well/fender. This is with stock tires on stick 20" wheels. I want to say when I first measured it was a lot closer. Let me kbow if this measurement answers your question or if u want another.

 

[SzymiRam@2019]

I said I had the spacer. I bought first gen lift which are still being sold without the spacer. The new ones come with it. So just make sure its a newer or I thibk gen 3 of the lift.

Hi, I just saw your post. So you have the first gen of Mopar lift installed without the extra spacers ?
Just picked mine today, and also got the first gen of lift, but I don’t have the ORP, and the rake is to much for me. Thinking of getting the ORP springs.

 

[Kingnothing]

I'm at 39 in the front and 40.5 in the rear. Ground to wheel well/fender. This is with stock tires on stick 20" wheels. I want to say when I first measured it was a lot closer. Let me kbow if this measurement answers your question or if u want another.

Yeah, that helps thanks. I wanted to have around an inch of rake but I think I can live with an inch and a half.

 

[Jsyjud]

Looks like you need alignment. Front wheels look a little pushed back in the wheel well

Its the angle of the picture

 

[Alex5737]

Hi, I just saw your post. So you have the first gen of Mopar lift installed without the extra spacers ?
Just picked mine today, and also got the first gen of lift, but I don’t have the ORP, and the rake is to much for me. Thinking of getting the ORP springs.

Yes! So its on another post but...if u had the dealer install the lift they will fix for free. If not u can go to a dealer and order the front spacer. It was 5.00. The rake is ridiculous without it. I added spacer plus ORP springs on the front. They give u about an extra inch and were only around 60 or 80 bucks if I remember correctly.

 

[Alex5737]

Yes! So its on another post but...if u had the dealer install the lift they will fix for free. If not u can go to a dealer and order the front spacer. It was 5.00. The rake is ridiculous without it. I added spacer plus ORP springs on the front. They give u about an extra inch and were only around 60 or 80 bucks if I remember correctly.

 

[Alex5737]

Mopar 2" lift on 2019 Sport Laramie with ORP front springs and Rebel OEM wheels and tires.

 

[Jeffjad]

Mopar 2" lift on 2019 Sport Laramie with ORP front springs and Rebel OEM wheels and tires.

Nice ride I have the same setup only with stock laramie wheels on 35's.

 

[Mrsundays]

Mopar lift on 285/65.

So the new kit actually leveled (at least close to level) on your ORP? I’m looking to do the same. Seems like the perfect stance for me...

 

[SzymiRam@2019]

Yes! So its on another post but...if u had the dealer install the lift they will fix for free. If not u can go to a dealer and order the front spacer. It was 5.00. The rake is ridiculous without it. I added spacer plus ORP springs on the front. They give u about an extra inch and were only around 60 or 80 bucks if I remember correctly.

Thank you for reply. Dealer didn’t installed for me, it was done by other very reputable off-road shop in Ontario. And I did provided the spacers for them, and they didn’t put the extra spacers, because according to them it’s not safe to stack those two rings on top of each other. Rake is very visible, don’t know what to do.


Sent from my iPhone using Tapatalk

 

[Alex5737]

Thank you for reply. Dealer didn’t installed for me, it was done by other very reputable off-road shop in Ontario. And I did provided the spacers for them, and they didn’t put the extra spacers, because according to them it’s not safe to stack those two rings on top of each other. Rake is very visible, don’t know what to do.


Sent from my iPhone using Tapatalk

Maybe somebody will read this and help u out.

 

[Azango]

Nice ride I have the same setup only with stock laramie wheels on 35's.
View attachment 75299View attachment 75300View attachment 75301

Truck looks great and is my goal to look the same. Will go get the ORP scheduled. Did you also do the black out emblems, I plan to do that.

 

[Jeffjad]

Truck looks great and is my goal to look the same. Will go get the ORP scheduled. Did you also do the black out emblems, I plan to do that.

Thanks, ya I swapped out all of the chrome badges for black except the hood badge. Eventually will look for some wheels but I don't mind the oem wheels for now.

 

[Alex5737]

Truck looks great and is my goal to look the same. Will go get the ORP scheduled. Did you also do the black out emblems, I plan to do that.

35 tires ....what size wheels 18"? What lift. Sorry If u already answered all this.

 

[Alex5737]

Nice ride I have the same setup only with stock laramie wheels on 35's.
View attachment 75299View attachment 75300View attachment 75301

Found it nevermind. Lol. So same set up but ur truck looks taller due to tire size. Looks great.

 

[Alex5737]

Nice ride I have the same setup only with stock laramie wheels on 35's.
View attachment 75299View attachment 75300View attachment 75301

I want to paint the trim around the grill black too and the calipers red and then im done.

 

[Alex5737]

Nice ride I have the same setup only with stock laramie wheels on 35's.
View attachment 75299View attachment 75300View attachment 75301

I was thinking about getting 34's. I like it

 

[Jsyjud]

So the new kit actually leveled (at least close to level) on your ORP? I’m looking to do the same. Seems like the perfect stance for me...

No it still has about 1.5 inch rake but that's what I wanted. I didnt want a leveled truck. I dont want to be nose high when I tow or have a heavy load in the bed.