Where did you get the modules and ODB genie from? I am in the same situation you were in. Replaced mirrors only and am interested just adding heat personally. Don't care about the power fold but will take it. Any advice on achieving this and lessons learned is appreciated.Got the OBDGenie and door modules today in the mail and installed them. Success!!! power fold, auto dim and heated mirrors work.
For grins I ran the Genie before I installed the door modules. The power fold switch and mirrors had been installed several months ago.
It didn't work so the door modules will have to be replaced in order to enable this option.
so, are these the Mopar parts that are in the aftermarket company package? Has anyone determined if one way or the other is cheaper (individual parts or infotainment?I found the part numbers for the door modules and other parts.
6842179AB Left Front Door Module
6842178AB Right Front Door Module
68262252AC Left Front Switch:
68276501AC Left Mirror (Heated, Power Fold, Puddle Light, Turn Signal, Auto Dim)
68276500AC Right Mirror (Heated, Power Fold, Puddle Light, Turn Signal)
6RP44GW7AA Right Outside Mirror Cover White
6RP45GW7AA Left Outside Mirror Cover White
I went the route it sounds like you did, but when I attempt to power fold the mirrors they will try and close and open twice before stopping. Did you have to leave the OBDgenie plugged in? I am trying to figure out what went wrong.Got the OBDGenie and door modules today in the mail and installed them. Success!!! power fold, auto dim and heated mirrors work.
For grins I ran the Genie before I installed the door modules. The power fold switch and mirrors had been installed several months ago.
It didn't work so the door modules will have to be replaced in order to enable this option.