Limited 22s on Bighorn

[JMIngrodi]

Hi guys. New here and my first post. Im not sure if this topic has been covered (sorry if it has) but Im still learning how to navigate the site.

Im hoping to be able to add stock limited 22s (with stock lownprofile tire size) to a stock big horn (which comes with 20s) without modification.
Is this possible or do I need to lift and or add spacers?
Thanks for any advice / help!.

 

[Idahoktm]

No modification needed.

 

[JMIngrodi]

Thanks so much!

 

[riveralg79]

Sent from my iPhone using Tapatalk

 

[djevox]

Welcome!

 

[Big Jim Swade]

I know this is an older thread, but do the Limited's that came with 22's have different / larger front hubs/bearings than the Bighorns that came with 20's? I am thinking of adding the 22's from a Limited also.

 

[Idahoktm]

I know this is an older thread, but do the Limited's that came with 22's have different / larger front hubs/bearings than the Bighorns that came with 20's? I am thinking of adding the 22's from a Limited also.

No.

 

[MikeyHo808]

Aren’t the 22’s a larger wheel bearing than the 18 and 20 inch equipped trucks? I remember a few threads regarding this topic.

BDS 4" Released

The does not work with list for those of you who will fall into it: IMPORTANT NOTES 1. This system will not fit vehicles equipped with 22” wheels from the factory due to a difference in hub bore size. This is probably a stupid question but I wonder if that means aftermarket 22s will work?

5thgenrams.com

 

[Idahoktm]

Aren’t the 22’s a larger wheel bearing than the 18 and 20 inch equipped trucks? I remember a few threads regarding this topic.

BDS 4" Released

The does not work with list for those of you who will fall into it: IMPORTANT NOTES 1. This system will not fit vehicles equipped with 22” wheels from the factory due to a difference in hub bore size. This is probably a stupid question but I wonder if that means aftermarket 22s will work?

5thgenrams.com

I believe he was asking if the hub size is different because he wants to put 22's from a Limited on his Big Horn. The hub size is the same. I know that because my Laramie came from the factory with 22's and I put OEM Rebel 18's on it for winter.

 

[MikeyHo808]

but do the Limited's that came with 22's have different / larger front hubs/bearings than the Bighorns that came with 20's?

I believe he was asking if the hub size is different because he wants to put 22's from a Limited on his Big Horn. The hub size is the same. I know that because my Laramie came from the factory with 22's and I put OEM Rebel 18's on it for winter.

He did mention bearings in his post, which got me thinking about it.
Jus saying…

 

[mplaramie]

He did mention bearings in his post, which got me thinking about it.
Jus saying…

I had some confusion about this too. When I bought my BDS lift (still in box), they asked about rim size. The 22's had a larger knuckle I think vs standard.

 

[Idahoktm]

He did mention bearings in his post, which got me thinking about it.
Jus saying…

 

[Big Jim Swade]

I finally found a set of take-off Limited 22's for my 2022 Big Horn Quad Cab. $900 for the set and had less than 500 miles on them. I did have to get new TPSM for them. I got a set of new OEM Mopar sensors on Ebay for $40.