Rawyzf
Active Member
Last night, placed my order for wheel, tires, and RC 2 Leveling Struts.
Wheels: Fuel Rebel D680 20x9 +1
Tires: Nitto Terragrappler G2 XL 305/55/20 (33.2 OD)
Rough County Leveling Struts 2"
I saw another post with a guy who did these wheels in 18x9 -12 with a 305/65/18 (33.6 OD) and didn't rub at stock height. I'm hoping to get lucky and have this be the case as well, but got the RC Struts just in case....and I know eventually I'll want to level anyway.
I'm currently running Rebel OEM wheels (18x8 +19) and tires (275/70/18 - 33.15 OD), so the tire size will be basically the same. I'll just be a little over 1" wider for the tire, and then the offset and width of the wheel will push the new wheels out 31mm and allow 5mm additional inner clearance.
Tools I use for wheels and tires I'll list below. I know many of you know of them, but I'll post links as I always find them helpful.
Offset Calculator: https://www.1010tires.com/Tools/Wheel-Offset-Calculator#
Tire Size Calculator / Comparison: https://www.tacomaworld.com/tirecalc
Wheels: Fuel Rebel D680 20x9 +1
Tires: Nitto Terragrappler G2 XL 305/55/20 (33.2 OD)
Rough County Leveling Struts 2"
I saw another post with a guy who did these wheels in 18x9 -12 with a 305/65/18 (33.6 OD) and didn't rub at stock height. I'm hoping to get lucky and have this be the case as well, but got the RC Struts just in case....and I know eventually I'll want to level anyway.
I'm currently running Rebel OEM wheels (18x8 +19) and tires (275/70/18 - 33.15 OD), so the tire size will be basically the same. I'll just be a little over 1" wider for the tire, and then the offset and width of the wheel will push the new wheels out 31mm and allow 5mm additional inner clearance.
Tools I use for wheels and tires I'll list below. I know many of you know of them, but I'll post links as I always find them helpful.
Offset Calculator: https://www.1010tires.com/Tools/Wheel-Offset-Calculator#
Tire Size Calculator / Comparison: https://www.tacomaworld.com/tirecalc
You should be fine! I was concerned about fitting 33.6” tires with stock suspension(no air) and it fits like a dream. Been driving for a couple weeks now and hit a couple of big bumps at high speed. No rubbing at all there or at full lock. I drove it around my neighborhood like a crazy person the first couple days trying to find a rubbing incident. Even with the bed fully loaded with tools, and two custom doors on my rack, still no rubbing.
