Just Ordered: Fuel Rebel D680 20x9 +1 305/55/20

[Rawyzf]

Last night, placed my order for wheel, tires, and RC 2 Leveling Struts.

Wheels: Fuel Rebel D680 20x9 +1
Tires: Nitto Terragrappler G2 XL 305/55/20 (33.2 OD)
Rough County Leveling Struts 2"

I saw another post with a guy who did these wheels in 18x9 -12 with a 305/65/18 (33.6 OD) and didn't rub at stock height. I'm hoping to get lucky and have this be the case as well, but got the RC Struts just in case....and I know eventually I'll want to level anyway.

I'm currently running Rebel OEM wheels (18x8 +19) and tires (275/70/18 - 33.15 OD), so the tire size will be basically the same. I'll just be a little over 1" wider for the tire, and then the offset and width of the wheel will push the new wheels out 31mm and allow 5mm additional inner clearance.

Tools I use for wheels and tires I'll list below. I know many of you know of them, but I'll post links as I always find them helpful.
Offset Calculator: https://www.1010tires.com/Tools/Wheel-Offset-Calculator#
Tire Size Calculator / Comparison: https://www.tacomaworld.com/tirecalc

 

[MechEng]

I see you now! You should be fine! I was concerned about fitting 33.6” tires with stock suspension(no air) and it fits like a dream. Been driving for a couple weeks now and hit a couple of big bumps at high speed. No rubbing at all there or at full lock. I drove it around my neighborhood like a crazy person the first couple days trying to find a rubbing incident. Even with the bed fully loaded with tools, and two custom doors on my rack, still no rubbing.

 

[Rawyzf]

I'm glad to hear that! If I can get away without the Level, I'll do that for a while....until I get the urge to get some taller tires!

 

[Rawyzf]

Wheels and Tires have arrived! Now just need to put them on (need to go to a shop as I had shoulder surgery recently and don't want to risk hurting something yet).

 

[Ram21]

Almost exact setup I’m looking to do, can’t wait to see your pics and impressions.


Sent from my iPad using Tapatalk

 

[Nova90]

Nice looking setup....should look nice on the truck.

 

[Rawyzf]

Almost exact setup I’m looking to do, can’t wait to see your pics and impressions.


Sent from my iPad using Tapatalk

Love these tires, some much quieter than the Duratracs.

Fitment is great, no rubbing at all.

I suck at pics, I'll get some better ones when it's not 1 million degrees out.

 

[Ram21]

Love these tires, some much quieter than the Duratracs.

Fitment is great, no rubbing at all.

I suck at pics, I'll get some better ones when it's not 1 million degrees out.

View attachment 95626 View attachment 95629 View attachment 95630 View attachment 95631

You're right, you suck at pics. Lol. Just teasing you.

Looks good but get some side shots, like you did in your original post.

 

[Rawyzf]

You're right, you suck at pics. Lol. Just teasing you.

Looks good but get some side shots, like you did in your original post.

Got some better ones now!

 

[pierontoni]

Got some better ones now!

 

[pierontoni]

Were you able to get some side views. I am also interested in seeing the gunmetal Rebel wheels on a silver Ram.

 

[Rawyzf]

Were you able to get some side views. I am also interested in seeing the gunmetal Rebel wheels on a silver Ram.

 

[Rawyzf]

 

[Rawyzf]

 

[Rawyzf]

Sorry Guys, I had those attached to my first reply early this weekend, but apparently they didn't stick or upload properly.

 

[pierontoni]

Sorry Guys, I had those attached to my first reply early this weekend, but apparently they didn't stick or upload properly.

Thanks for uploading the pictures. The truck and wheels look great !!!

 

[Rawyzf]

Thanks for uploading the pictures. The truck and wheels look great !!!

Thanks!

 

[T-money]

Truck is looking great. I’ve been looking at that exact wheel with some 295’s for my ORP Laramie. Did you end up putting the 2” level in? How about UCA clearance…any concerns/issues?

 

[Rawyzf]

Truck is looking great. I’ve been looking at that exact wheel with some 295’s for my ORP Laramie. Did you end up putting the 2” level in? How about UCA clearance…any concerns/issues?

Thanks!

I'm still stock, no suspension modifications yet.

 

[CMil527]

Looks great!