5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

I need a little help about the Rambox "Jumper Wiring Harness"

2001gw

Active Member
Joined
May 14, 2021
Messages
112
Reaction score
87
Points
28
Age
79
Location
Ocala, FL
I have a 2021 RAM 1500 Limited with Ramboxes. Shortly after I purchased it (in 2021) the left Rambox started popping open by itself. I unplugged the connector at the latch to stop it from happening. About two weeks later I decided to plug it back in and see what happened. That was 4 years ago. It never popped open again…until recently.

About a month ago it started popping open again. I tried unplugging the connector again for a couple of weeks but the problem still exist.

While searching the problem and solutions on this site, I came across several comments about a “Jumper harness.” I have since ordered and received the harness.

My question is: Do I simply remove the old harness and replace it with the jumper harness and the problem is solved?

Thanks.

Rambox 2.jpg
 

Users who are viewing this thread

Back
Top