Granite crystal metallic thread

[judsonlimited]

Just installed NFAB RS step bars

View attachment 69117

Oh me too!

Sent from my iPhone using Tapatalk

 

[Watts254]

Are those 295s?

285/75R18

 

[TinyDancer]

Probably the last of the first mods as to be expected. But NFab RS step bars, BedReg, Gator EFX trifold. Easy trip stuff Tactilian includes the subdued flag magnet and valve stems

 

[Shuga]

Another Beach Day

Quick question for you. I’m also on LI and drive on the beaches. What mode do you put your truck in? 4high 4low or 4auto?


Sent from my iPhone using Tapatalk

 

[Doberman11]

Quick question for you. I’m also on LI and drive on the beaches. What mode do you put your truck in? 4high 4low or 4auto?


Sent from my iPhone using Tapatalk

Low and I air down.

 

[NOLA TBOY]

Recently finished my Mopar lift, with tire rim combo and Havoc bars.

 

[DaU478]

Finally can post on this forum Been looking at the 1500's since xmas and finally got mine this past week in Granite Crystal!!!

Beautiful truck!!! What boards are those? I am trying to pick some out for my truck.

 

[Scmil]

Finally got all parts in and installed: 6in Zone w/ 35x12.5 on 20x9 Fuel Coverts. Waiting on trim for tow hook install.

 

[Barney21]

Just got a 2021 Bighorn. It’s in the garage and will get improvements as cash flow permits. Put in a dual liner bed liner, awaiting my Wet Okole seat covers, got some Husky all weather mats, also GoRhino RB-10 running boards. This truck has the Hemi eTorque engine, 392 gears, and some other nice options. Pic shows the Super Bumper I put on there, it will stop the slow moving auto that might be doing a text message while I’m waiting for the green light. I been rear ended at red lights more than once, so this truck gets some armor.

 

[Timothyduggan]

Big Horn Level 2 4x4 Hemi (no etourque) 3.21 axle, Bilstein 5100 front and rear (fronts set to position 5), Icon 1.5" springs in rear, Mopar 2" lift UCAs, BF Goodrich KO2s 285x65xr20, stock wheels, mopar skid plates, in channel Mopar window visors, Tyger T3 tonneau cover

 

[fatalPORKshank]

Lost my 2015 1500 Sport GCM in September. I was run off the road while towing my motorcycle. Both vehicles totaled in the same accident. It was not a good day. The family and I were ok but I came to realize, I'm not a car person. The rental Hyundai wasn't cutting it! Enter the 2019 Ram 1500 Laramie. I searched high and low for a Granite Crystal Metallic '19 with a set of "must-have" options. This one almost checked every box. I'd come to appreciate the adaptive cruise, standard on my wife's '17 Rav4, and I was really excited Ram had finally adopted this option. I also miss the air suspension although the standard suspension on the '19 is so much smoother than the air on my '15. I thought I was spoiled in my '15, this thing is on a whole other level. I am in awe every time I settle in the driver's seat!

I'd been wanting to light paint this gorgeous machine since I picked her up. Unfortunately, due to this pandemic, I'm covering several shifts to include overnights and that's the only time to light paint! I found some time earlier this week when someone offered to cover an early morning for me. Not the ideal set up but I got out and shot! Hope you enjoy this bit of eye candy!

 

[iLikeRamsnow]

Here’s my truck. Just got it, here a few weeks ago

 

[Nels]

Big Horn Level 2 4x4 Hemi (no etourque) 3.21 axle, Bilstein 5100 front and rear (fronts set to position 5), Icon 1.5" springs in rear, Mopar 2" lift UCAs, BF Goodrich KO2s 285x65xr20, stock wheels, mopar skid plates, in channel Mopar window visors, Tyger T3 tonneau cover

I really like the look of your tire set up. Just bought my 2019 Laramie 4x4 a month ago. I've had a 2" Ready lift leveling kit installed in preparation for larger tires. Planning to use the stock 20" rims, so would be similar to your setup. 3.21 axle also. The 285/65 /20 is a pretty tall and heavy tire. Any issues or regrets? Did you replace your spare with a comparable diameter? If so does it fit underneath? Pics are before the leveling kit.

 

[Scmil]

Got around to installing the tow hooks and lamin-x overlay for the fogs

 

[z0n3]

Hope to post in this thread within a month after I take delivery!

 

[Timothyduggan]

I really like the look of your tire set up. Just bought my 2019 Laramie 4x4 a month ago. I've had a 2" Ready lift leveling kit installed in preparation for larger tires. Planning to use the stock 20" rims, so would be similar to your setup. 3.21 axle also. The 285/65 /20 is a pretty tall and heavy tire. Any issues or regrets? Did you replace your spare with a comparable diameter? If so does it fit underneath? Pics are before the leveling kit.

no regrets at all on the setup. Truck rides a little stiffer, as expected but the truck feels more planted to the road. I did not replace my spare.

 

[Bigdumps]

A couple from me

Great looking truck! Any rubbing with the 35's?

 

[Seancct]

Just got my new 2021 1500 Limited about 3 weeks ago. So far just added some Cooper AT3s and a Leer HF650M bed cover.

 

[Grey Goose]

Here’s my 2020 Ram Laramie 6 weeks old with Bakflip bed cover, retinted windows, IHC 3/5 drop , Ceramic coated on 24s

 

[Yogi217]

Big Horn Level 2 4x4 Hemi (no etourque) 3.21 axle, Bilstein 5100 front and rear (fronts set to position 5), Icon 1.5" springs in rear, Mopar 2" lift UCAs, BF Goodrich KO2s 285x65xr20, stock wheels, mopar skid plates, in channel Mopar window visors, Tyger T3 tonneau cover

I love this setup. Thinking of doing something similar. I just sent you some questions regarding towing and hauling. Love to hear your feedback.

Sent from my SM-N975U1 using Tapatalk