5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Got my Rough Country 3.5" lift installed, need advice on wheels/tires

Celtic Sun

Active Member
Joined
Sep 3, 2018
Messages
49
Reaction score
18
Points
8
Age
51
Installed my 3.5" lift the other day and I'm really happy with it. Now my Laramie's stock 20" wheels and tires just look bland. I'd like to get new wheels and tires but wheel/tire stuff is new to me. I'd like the tires to sit flush with the fender flares up and I'd like to not have to trim anything. Rough Country says the lift will support a 295/60r20 but that is on the stock 20" wheel. They could not give me any advice for after market wheels/tires.

I'm looking to run Nitto Ridge Grapplers, just need advice on the offset for a 20x9 wheel and tire size to achieve a flush with fender flare look that doesn't require trimming on a 3.5" lift. Thanks!
 
Installed my 3.5" lift the other day and I'm really happy with it. Now my Laramie's stock 20" wheels and tires just look bland. I'd like to get new wheels and tires but wheel/tire stuff is new to me. I'd like the tires to sit flush with the fender flares up and I'd like to not have to trim anything. Rough Country says the lift will support a 295/60r20 but that is on the stock 20" wheel. They could not give me any advice for after market wheels/tires.

I'm looking to run Nitto Ridge Grapplers, just need advice on the offset for a 20x9 wheel and tire size to achieve a flush with fender flare look that doesn't require trimming on a 3.5" lift. Thanks!
You will not achieve flush on 20x9 with aftermarketfender flares, if thats what you have...the flares stick out at least 3"....your best bet with flares n flush would be no less than 10" wide rim, unless you are interested in adding 2" hubcentric wheel spacers.....great call on tires!!
 
Last edited:
Here is a 18x9 -12 with 33 x 12.50 ridge grappler, Laramie with factory fender flares
 

Attachments

  • 20180929_110549.jpg
    20180929_110549.jpg
    1 MB · Views: 133
Last edited:
You will not achieve flush on 20x9 with aftermarketfender flares, if thats what you have...the flares stick out at least 3"....your best bet with flares n flush would be no less than 10" wide rim, unless you are interested in adding 2" hubcentric wheel spacers.....great call on tires!!

Sorry, I guess I should have been more specific about the gender flares. I meant to say that they are the factory installed flares.
 
Installed my 3.5" lift the other day and I'm really happy with it. Now my Laramie's stock 20" wheels and tires just look bland. I'd like to get new wheels and tires but wheel/tire stuff is new to me. I'd like the tires to sit flush with the fender flares up and I'd like to not have to trim anything. Rough Country says the lift will support a 295/60r20 but that is on the stock 20" wheel. They could not give me any advice for after market wheels/tires.

I'm looking to run Nitto Ridge Grapplers, just need advice on the offset for a 20x9 wheel and tire size to achieve a flush with fender flare look that doesn't require trimming on a 3.5" lift. Thanks!
I've got Nitto Ridge Grapplers (295/60/20) on my stock wheels - just like they have in their photos on their website - I think it looks awesome! My truck looks exactly like the one they have on their website, except it's Maximum Steel.
 
Installed my 3.5" lift the other day and I'm really happy with it. Now my Laramie's stock 20" wheels and tires just look bland. I'd like to get new wheels and tires but wheel/tire stuff is new to me. I'd like the tires to sit flush with the fender flares up and I'd like to not have to trim anything. Rough Country says the lift will support a 295/60r20 but that is on the stock 20" wheel. They could not give me any advice for after market wheels/tires.

I'm looking to run Nitto Ridge Grapplers, just need advice on the offset for a 20x9 wheel and tire size to achieve a flush with fender flare look that doesn't require trimming on a 3.5" lift. Thanks!

I just did exactly what you want. PM me if you want the details.
 

Attachments

  • 20181006_120846.jpg
    20181006_120846.jpg
    1.2 MB · Views: 209
Installed my 3.5" lift the other day and I'm really happy with it. Now my Laramie's stock 20" wheels and tires just look bland. I'd like to get new wheels and tires but wheel/tire stuff is new to me. I'd like the tires to sit flush with the fender flares up and I'd like to not have to trim anything. Rough Country says the lift will support a 295/60r20 but that is on the stock 20" wheel. They could not give me any advice for after market wheels/tires.

I'm looking to run Nitto Ridge Grapplers, just need advice on the offset for a 20x9 wheel and tire size to achieve a flush with fender flare look that doesn't require trimming on a 3.5" lift. Thanks!
I'd run a 295/65r20 with that setup .
 
Installed my 3.5" lift the other day and I'm really happy with it. Now my Laramie's stock 20" wheels and tires just look bland. I'd like to get new wheels and tires but wheel/tire stuff is new to me. I'd like the tires to sit flush with the fender flares up and I'd like to not have to trim anything. Rough Country says the lift will support a 295/60r20 but that is on the stock 20" wheel. They could not give me any advice for after market wheels/tires.

I'm looking to run Nitto Ridge Grapplers, just need advice on the offset for a 20x9 wheel and tire size to achieve a flush with fender flare look that doesn't require trimming on a 3.5" lift. Thanks!

I have the ReadyLift 3.5" lift w/ Nitto Ridge Grapplers (295/60R20) on 20x9 Fuel Offroad Mavericks with a 0 offset (stock is around +19).

They are pretty flush - I actually wish they stuck out a little more. Note: I have a Laramie with the stock fender flares.

new lift.jpgIMG_2575.jpg
 
Installed my 3.5" lift the other day and I'm really happy with it. Now my Laramie's stock 20" wheels and tires just look bland. I'd like to get new wheels and tires but wheel/tire stuff is new to me. I'd like the tires to sit flush with the fender flares up and I'd like to not have to trim anything. Rough Country says the lift will support a 295/60r20 but that is on the stock 20" wheel. They could not give me any advice for after market wheels/tires.

I'm looking to run Nitto Ridge Grapplers, just need advice on the offset for a 20x9 wheel and tire size to achieve a flush with fender flare look that doesn't require trimming on a 3.5" lift. Thanks!
I have fuel 20/9 with good year duratracs 35/12.5/20 The offset is 0 so they are almost flush
 

Attachments

  • 4024F6E2-03F7-453F-8DB2-C6ED5974D32E.jpeg
    4024F6E2-03F7-453F-8DB2-C6ED5974D32E.jpeg
    3.2 MB · Views: 136
Yeah a little bit at full lock at the bottom of the liner but I've been too busy to trim it up.
 

Users who are viewing this thread

Back
Top