Fuel management delete

[Djdrag]

Try find something to delete the fuel management system every thing I have found is for GM only

 

[Wild Bill]

We need more info on your truck and exactly what you are trying to do...

 

[HSKR R/T]

Try find something to delete the fuel management system every thing I have found is for GM only

You mean MDS? Is there a reason you want to delete it?

To properly delete it, you will need to replace the lifters, remove the MDS solenoids and install plugs, then get a custom tune for the computer.

If you just want to disable it, so it doesn't turn on, you can either hit the tow/haul button, use the gear limit switches and set it to 8th gear, or buy a Pulsar piggy back "tuner".

 

[G Gerard]

Try find something to delete the fuel management system every thing I have found is for GM only

Are you asking about the MDS (Multi Displacement System), that shuts down (4) cylinders? If so, there are a few ways.

 

[stevj]

Try find something to delete the fuel management system

Remove fuel tank. Poof! No fuel to manage.
Actually, you will get more focused response with use of proper terminology and by giving some details of vehicle configuration.
MDS (Multi-Displacement System) switches between 4-cylinder mode and 8-cylinder mode, unless it is disabled.
Stop/Start can be considered a fuel management of sorts at stoplights, where the engine shuts off for the duration, again, unless it is disabled.

Steve

 

[G Gerard]

Try find something to delete the fuel management system every thing I have found is for GM only

Assuming you mean the MDS system, I installed this on my 22 with a 5.7. It has a play list of several things you can change from their app. Pretty easy install as well.

Pulsar 32456 Pulsar XT for Ram

Pulsar XT is an all-new take on drivability and calibration for your 3.6L and 5.7L Ram 1500. Unlike any other device on the market, Pulsar XT is an innovative inline module engineered to keep your factory PCM untouched, with no PCM swap or unlock required. This is the most advanced and easiest...

www.edgeproducts.com

 

[Wild Bill]

OP has not been around since Sept 17.
Probably not even following this thread anymore...

 

[Zdivers]

OP has not been around since Sept 17.
Probably not even following this thread anymore...

Some of us newbies are reading up so it does help.

 

[Wild Bill]

Ya, no worries, I get it.
Been there done that!