I got a “late” start in and to this thread (as it is presently May 2024.)
I am still posting anyway, just in case some “future” RAM 1500 people may need some help.
I purchased the Westin Westin HDX Grille Guard (and Winch) from
www.westinautomotive.com
I also purchased the Sensor relocation kit (from Westin) - as the Guard tray totally
Blocks 🙅♂️ the front parking sensors.
The part number for the RAM 1500 is -
- 40-0045S
(See attached photos, and/or download the instructions/install files, directly from the Westin web site).👍
Overall, all went well with the Grille Bar installation, except for the sensor relocation - as it seems that the RAM computer is somewhat now “confused” - but I think this just a matter of moving the sensors around, till it [they] get back in “Sync.” (Maybe??)🤷♂️
Right now, with this guard you have to relocate the sensors at least 12 inches [vertically] “upward” 👆 (on the Bar).
I believe the relocation of the sensors (this high) really knocks the sensors “Out of Alignment.”😵💫
The Westin instructions say to mount the sensors around 12 inches apart from one another (horizontally), on the bar itself.
Mine I did about 16 inches apart (which may be a part of my problem).🥵
I’m going to first:
1) Point the sensors “downward” to see if that will work, or
2) Move them to the 12 inch separation (mentioned in the Westin instructions).
Hopefully 🙏, one of these methods will work (to get my front sensors working, again).
I will report back here (whenever [or whatever] works).👍
PS - if anyone else other there has gotten there Relocation to work then please let me know (as far as the BEST place to put these).