FitCamX dashcam

[EP328]

You mean a FitcamX?

Yes

 

[jl13]

How difficult was it to get the small center trim piece cover off? One of the YT vids on it seemed to be a PITA. Also, so what if you break the OEM cover, the whole thing (cover) is getting replaced anyway correct?

I found 1 video but can't find it again. The guy in there used a thin flat screwdriver on the center piece and it was super easy.
I follow its advised and it was real easy, nothing got broken

 

[6of36]

The absolute hardest part, is getting off that piece. The rest of the install, took less time. It's super easy. Pop off the old cover, disconnect one connector, plug new harness to old connector, install cover. Then program, per instructions. Just remember to remove protective film from camera. I'm one idiot who didn't notice, and had to remove again.

 

[Skater]

Has anyone run the back window FitCamX camera in 2025 yet? If so, any advice? If so, did you purchase the additional lens, etc.?

 

[Code2medic]

In before this one gets deleted lol


Sent from my iPhone using Tapatalk Pro

Why are they getting deleted

 

[Eighty]

Why are they getting deleted

It was just a little spat between members...like two years ago. No moderation on the actual topic at hand.

 

[HSKR R/T]

Why are they getting deleted

You realize you are asking about a 2 year old post?

 

[Code2medic]

You realize you are asking about a 2 year old post?

And your point?

You do realize I can’t go back and read where I left off to see the lovers quarrel

How else would one find out why it was deleted not like I can continue reading where I left off as I do remember and have commented in that thread. One always has to wonder why a dashcam thread gets nuked consider the topic is fairly harmless and straight forward

 

[Code2medic]

It was just a little spat between members...like two years ago. No moderation on the actual topic at hand.

I’m sure it was between a few on my block list lol. Sad cause it was informative

 

[The New Guy]

Yeah, it seems like they use the same power source at the mirror. I’m a comma3 guy as well and absolutely love it. I have thought about doing a dash cam too, simply because the comma leaves a lot to be desired in that department. The FitCam looks super cool, but I also mount my comma off the bottom of the mirror surround using a 3d printed mount, so that’s another incompatibility for me.

Can you show me the mount you speak of? I'm in the market to get a Comma ai 3x too and also have the fitcamx installed. I saw someone on Facebook had a 3d printed mount that mounted to the fitcamx housing.

Yeah, it seems like they use the same power source at the mirror. I’m a comma3 guy as well and absolutely love it. I have thought about doing a dash cam too, simply because the comma leaves a lot to be desired in that department. The FitCam looks super cool, but I also mount my comma off the bottom of the mirror surround using a 3d printed mount, so that’s another incompatibility for me.

I'd be interested in seeing your setup for the fitcamx and the comma. I saw this a on Facebook thread hut can't seem to find where to get it.

 

[toyboy1980]

I don’t have a RAM anymore, but I never found a solution for having both installed. There may be one now.