Finally got my Daystar spacers installed.

[rsmeanie]

I installed my Revel links a couple months ago and it leveled out my truck nicely but it did affect the ride some. I didn’t go real high in the front so it wasn’t horrible but it was noticeable. I had the Daystar spacers installed today and everyone was right. The ride is back to factory smooth. I’m a happy camper.

 

[barakutha]

Welcome to the club

Sent from my iPhone using Tapatalk

2019 Limited 4x4 with ramboxes, no etourque
- Borla cat-back touring with resonator
- 20% ceramic tint all around and pano
- Leveled with Daystar spacers and revel links (0.5in rake)
- Nitto ridge grapplers 285/55r22 (34.6x11.7)

 

[19TXLimited]

Pictures?

 

[ryanJ]

Would like to know the specifics of the spacers and links you used. New here and been doing research in attempt to get her level.

 

[JHRebel]

This may be an ignorant question, but why do the spacers change the ride and will it do the same for the coil suspension?

 

[barakutha]

This may be an ignorant question, but why do the spacers change the ride and will it do the same for the coil suspension?

They help to keep the air bags or coils at a reasonable spring rate


Sent from my iPhone using Tapatalk

 

[Couchsachraga]

I seem to recall other parts were needed than just the spacers (new control arms?) when folks discussed this last year. I'm getting serious about new rubber, and though I'm using the Revel Links to level (raised front / lowered rear a bit) I'm seriously thinking of doing it right and adding a spacer+ whatever else is needed - unfortunately for me lots of new threads since last year, so if someone would be so kind please let me know what I should consider for leveling (on top of the Revel links I have already) for a ORP 1500 with air suspension. Thank you

 

[Samson75]

Welcome to the club

Sent from my iPhone using Tapatalk

2019 Limited 4x4 with ramboxes, no etourque
- Borla cat-back touring with resonator
- 20% ceramic tint all around and pano
- Leveled with Daystar spacers and revel links (0.5in rake)
- Nitto ridge grapplers 285/55r22 (34.6x11.7)

I have a very similar set up .... what is the Daystar part #’s .

 

[Samson75]

hey everyone! Very excited to hear your having success matching the revel leveler arms with a 1.5 Daystar spacer ! I’m picking up new rims and tires. I really want to do this one right ! Question is, did you all use the same Daystar kit as the coilover 1.5” spacer ? Ive been hunting everywhere and I just cannot find a conclusive “THIS IS SPECIFICALLY WHAT I USED FOR MY AIR RIDE EQUIPPED 2019 RAM 4x4. “.

 

[Samson75]

Would like to know the specifics of the spacers and links you used. New here and been doing research in attempt to get her level.

Welcome to the club

Sent from my iPhone using Tapatalk

2019 Limited 4x4 with ramboxes, no etourque
- Borla cat-back touring with resonator
- 20% ceramic tint all around and pano
- Leveled with Daystar spacers and revel links (0.5in rake)
- Nitto ridge grapplers 285/55r22 (34.6x11.7)

pleeeese can you share the day star part #...

 

[barakutha]

pleeeese can you share the day star part #...

Daystar Spacers
KC09113BK

Revel performance also has a combo with both the front links and spacers if you check their website


Sent from my iPhone using Tapatalk


2019 Limited 4x4 with ramboxes, no etourque
- Borla cat-back touring with resonator
- 20% ceramic tint all around and pano
- Mostly dechromed and debadged
- Leveled with Daystar spacers and revel links (0.5in rake)
- Nitto ridge grapplers 285/55r22 (34.6x11.7)

 

[Samson75]

Daystar Spacers
KC09113BK

Revel performance also has a combo with both the front links and spacers if you check their website


Sent from my iPhone using Tapatalk


2019 Limited 4x4 with ramboxes, no etourque
- Borla cat-back touring with resonator
- 20% ceramic tint all around and pano
- Mostly dechromed and debadged
- Leveled with Daystar spacers and revel links (0.5in rake)
- Nitto ridge grapplers 285/55r22 (34.6x11.7)

super excited! Thanks!!

 

[fflis]

So the Revel site says this will only work for 4x4. I have a Limited RWD, has anyone been able to use these on 2wd?

 

[Samson75]

Daystar Spacers
KC09113BK

Revel performance also has a combo with both the front links and spacers if you check their website


Sent from my iPhone using Tapatalk


2019 Limited 4x4 with ramboxes, no etourque
- Borla cat-back touring with resonator
- 20% ceramic tint all around and pano
- Mostly dechromed and debadged
- Leveled with Daystar spacers and revel links (0.5in rake)
- Nitto ridge grapplers 285/55r22 (34.6x11.7)

Thanks!!!

 

[NJC1684]

What suspension setting are you at in the photo? How long are yours link eye-eye?

Thanks

 

[Samson75]

What suspension setting are you at in the photo? How long are yours link eye-eye?

Thanks

OR 1 . Still one click to go !! Lol. Here is a pic in normal. Eye to eye was 50 mm . This creates a dead level stance for the truck every 5 mm Longer drops the truck 1/2

 

[NJC1684]

OR 1 . Still one click to go !! Lol. Here is a pic in normal. Eye to eye was 50 mm . This creates a dead level stance for the truck every 5 mm Longer drops the truck 1/2

Looks great! Thanks for the info.