5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Fastener Size?

Treeant34

New Member
Joined
Dec 30, 2019
Messages
3
Reaction score
1
Morning:

A search came up empty (no surprise - only someone that has used these holes would know).

There are eight (8) captured nuts inside the bed (2 vertical on each corner of the bed).

The person that sprayed the liner in the bed got goop in the holes so I have no idea what thread size is required to use these captured nuts.

Has anyone used these and if so what thread size are they?

Don't want to use the wrong thread chaser and ruin the inserts.

The attached picture shows the holes at the rear near the LED's.

Help?

Thanks
 

Attachments

  • CIMG0317.JPG
    CIMG0317.JPG
    313.2 KB · Views: 52

2019REBEL

Spends too much time on here
Joined
Jan 28, 2018
Messages
2,184
Reaction score
1,039
Location
ON, Canada
Those are the RivNut holes size is M8 Hex RivNut used for the box utility rails.
 

Users who are viewing this thread

Top