Falken Wildpeak A/T4W 285/65R20 on 2019 Bighorn with ReadyLift 2" Level - Before-After

[gotalbots]

Thought I'd share pics my recent install of Falken Wildpeak A/T4W 285/65R20 on my 2019 Bighorn which has a 2" ReadyLift Level kit. I know myself, I was searching hard to see what this setup looked like before I installed. Here's some Before and After. The front drivers side rubbed the front inner wheel well Liner. A quick and simple wire tie solution corrected that.

 

[theblet]

Looks awesome !

 

[Redz72]

Well done!

 

[stevieb92]

Looks great!

 

[CHeYeNNe71]

Great choice in tires! I'm going same tire and size with my BDS 3" lift kit.

Thoughts on them? So far I haven't seen any complaints. I know they're still somewhat new.

 

[mikes911]

Just put the AT4W on my Ram in February. Happy with the ride. Seems to grab very well in standing water, typical rear end challenges without a load in the bed, but no real bad weather or real off road with it yet. I've run the AT3W on my Jeep for a couple years now, happy so far with them in wet, ice, some snow, forest roads (dirt, gravel, rocks).

 

[RamBuilt2serve]

Looks great, any rubbing at all/trimming trquired
? ... I'm doing something similar. Just had the bilstein 5100 installed, 2.6" lift. Upgrading from stock 275 55 20. Thinking continental contiterrain, those falkens or COOPER RDISCOVERER AT3 XLT

 

[Slutzk]

Looks great, any rubbing at all/trimming trquired
? ... I'm doing something similar. Just had the bilstein 5100 installed, 2.6" lift. Upgrading from stock 275 55 20. Thinking continental contiterrain, those falkens or COOPER RDISCOVERER AT3 XLT

Shouldnt have any issues at all. Have my set up in signature and i didnt need to trim, mold, or use spacers. (op tire size is nearly the same as mine)

 

[gotalbots]

Looks great, any rubbing at all/trimming trquired
? ... I'm doing something similar. Just had the bilstein 5100 installed, 2.6" lift. Upgrading from stock 275 55 20. Thinking continental contiterrain, those falkens or COOPER RDISCOVERER AT3 XLT

Slight rubbing front driver inner liner, easy wire-tie fix.