5thGenRams Forums
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Dividers for Rambox on 2020 RAM 2500. Where to get them?
- Thread starter omarcheli
- Start date
Yes, they are the same.
- Joined
- Feb 24, 2018
- Messages
- 4,980
- Solutions
- 1
- Reaction score
- 4,717
- Points
- 113
- Age
- 47
- Location
- Central Pennsylvania
As stated above they are the same.
If you are not finding them for a 2020 2500, try 2018 2500. It is the same bed as the 4th Gen HeavyDuty from 2010 to 2018
If you are not finding them for a 2020 2500, try 2018 2500. It is the same bed as the 4th Gen HeavyDuty from 2010 to 2018
Mike67
Active Member
From what I saw online the items below are saying they only fit the 1500 Classic (DS) , not the 5th Gen(DT)
82212966 is the Management System, so 2 Horizontal Floors, 3 dividers, 2 nets. $166
The following are showing they fit the 5th Gen (DT)
The ones I found online were 82215793AB for $77 for 1 side. That is just the 3 dividers.
I didnt buy them, that was when I was looking.
82212966 is the Management System, so 2 Horizontal Floors, 3 dividers, 2 nets. $166
The following are showing they fit the 5th Gen (DT)
The ones I found online were 82215793AB for $77 for 1 side. That is just the 3 dividers.
I didnt buy them, that was when I was looking.
- Joined
- Feb 24, 2018
- Messages
- 4,980
- Solutions
- 1
- Reaction score
- 4,717
- Points
- 113
- Age
- 47
- Location
- Central Pennsylvania
Yes he would want the one for the 1500 classic DS. His HeavyDuty still uses the classic bed and is 6'4.
The DT only has RamBox on 5'7 bed.
@omarcheli the part number should be right.
In case you havent seen. WWW.HDRAMS.COM
It is our sister site for the HeavyDuty.
There are to sites to help alleviate the confusion with the 5th Gen 1500 and the 4.5 Gen HeavyDuty.
The DT only has RamBox on 5'7 bed.
@omarcheli the part number should be right.
In case you havent seen. WWW.HDRAMS.COM
It is our sister site for the HeavyDuty.
There are to sites to help alleviate the confusion with the 5th Gen 1500 and the 4.5 Gen HeavyDuty.
Sorry omarcheli, I misread your original question. Must have been going from the thread title. I thought you were asking about the bed divider.
