5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Dash Vibration

Could someone help me hearing this noise near my steering wheel. It's very noisy when the road is in bad condition

Ram Laramie sport 2019

Noise video <------ this is the video I upload on google drive
 
I am having the same problem on my 2019 limited. 64k miles. Has 5 inch lift on 35s air ride. The noise is identical to tyrants clip. My clip is too large to post. But i have a clip of the same exact noise.
Hi do you solve this ?

I have same problem
 
Hey guys,
Bringing back an old thread coz I got this exact noise and its been a pain to locate it. Any one find a solution or possible cause?

I know so far what its not:
1. not the hood release cable
2. not the ebrake
3. Not any loose cables below dash
4. Not the Headliner
5. not any loose modules in the driver side area
6. not any loose panels in the driver side area
7. not the nav screen or any other loose cables or connectors behind it.
8. Not the speaker grilles
9. Not the clock spring

Any ideas?

Also adding a video of the noise (its the plastic rattling sound):
I cringe just hearing that sound.. same sound I'm having driving me crazy
 
Has anyone noted a dashboard vibration over 50mph on the driver side near the windshield base? My dealer can't replicate, which is to be expected as it usually comes to light after a bit of driving, a short test drive wouldn't show it.
I found the source of the rattle and fixed it. I pulled the lower right panel under the emergency brake lever and the panel with the lever. Behind it on the right side there are several wiring harnesses that are plastic and loosely mounted to aluminum. The second one from the front was rattling up and down and was making the noises when I went over small bumps. I used several zip times around two of the harnesses and snugged everything up and now its gone. The harnesses are about three inches long and about one half inch wide and are mounted vertically on the wall.
 

Users who are viewing this thread

Back
Top