5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Dash Lights Power Circuit - Rocker Switch Connection

Joined
Jan 20, 2021
Messages
3
Reaction score
2
Points
3
Age
32
Location
Benson, AZ
Hello everyone. I have a 2020 Power Wagon and recently hooked up a brush guard with 4 LED pods, 2 A-Pillar LED pods, 2 rear trailer hitch attached LED pods, and wiring for future rock light and roof mounted LED Bar attachments. I have them all connected through the battery, relays, and inline fuses to a 6 switch rocker panel and was wonder how to wire the switches to the Dash light circuit and where that may even be? The switches I'm using are the 5pin, dual indicator LED ones. The top indicator LED comes on by flipping the switch on when using a specific LED pod set (Showing power is correctly being output to it), however from various videos, the bottom indicator light will only illuminate when the truck is turned on (Remains on the entire time the truck is on, regardless of switch position), if wired to the Dash Lights Power Circuit. Where is the easiest area to access this power circuit and easiest method to wiring the switches to it, for anyone that's done similar?
 

Attachments

  • 1.jpg
    1.jpg
    115.7 KB · Views: 35
  • 2.jpg
    2.jpg
    136.8 KB · Views: 33
  • 3.jpg
    3.jpg
    140 KB · Views: 33
there is a video on how to pin it so that bottom light on the switch only lights when the switch is throwed i just watched the vid yesterday. maybe at nilight or somewhere. i am in process of doing the exact same things you have done.
 

Users who are viewing this thread

Back
Top